Socket Mobile GTOCP2 RS-232 Connectors, Focus Connector, Reticle Connector, Autoguider Connector

Page 17

RS-232 Connectors

These serial port connections are used to connect your mount to your PC computer. You must provide your own straight- through (non-crossing) cables with a 9-pin (DB9) male connector to interface with the GTO panel. We have provided the locking posts to secure the cable firmly. If your serial cable does not have a 9-pin connector, you can use a gender changer or adapter to convert it.

When you are controlling the position of the mount with a computer program such as DigitalSky Voice™ or TheSky™, the microprocessor chip located in the servo drive box will send continual RA and Dec coordinate data via the cable connections to your computer. When you use the software to give instructions to slew to a new object, the commands (RA and Dec coordinates) are sent to the mount.

We provide two serial port connections on the mount so that you can use two software programs simultaneously. For instance, you can give verbal commands in DigitalSky Voice while using TheSky as a planetarium program. Since the mount will update the RA and Dec coordinates simultaneously, both programs are continually updated with the data from the mount. You can watch the screen display of TheSky to see where your telescope is pointing as it slews. This is most effective if you have a reasonably fast computer with plenty of RAM. If you try this with a 100MHz processor and only 32 MB of RAM, the response time will be slow since both programs must be continuously updated with position data.

You must have two serial ports available on your computer to take use both serial ports simultaneously. If you use a laptop, you may need to purchase a PCMCIA adapter to gain an additional serial port. Socket Communications offers adapters for many computers. Check out their web site at www.socketcom.com.

If you have only one serial port available on your PC and wish to operate DigitalSky Voice and TheSky simultaneously, you can use the Link Bridge feature of DigitalSky Voice. Please refer to the documentation provided with DigitalSky Voice and our website for further information.

FOCUS Connector

Attach the 3.5mm phono plug connector of your JMI Motofocus or Meade electric focuser (optional accessories) here. Refer to the section regarding focus adjustment in the GTO Keypad Manual for instructions on using the keypad controller to adjust focus. Alternatively, you can verbally control the focus using the Focus Mode of DigitalSky Voice software.

RETICLE Connector

If you wish to use a plug-in type guiding eyepiece with an illuminated reticle (available from several manufacturers), insert the 3.5mm phono plug into this connector for power. Reticle brightness can be adjusted with the hand control. Refer to the section pertaining to reticle illuminator adjustment in the GTO Keypad Manual for further information.

AUTOGUIDER Connector

This connector interfaces with the RJ-11-4 modular jack of an autoguider cable, purchased separately or as part of a CCD Imaging Camera or Autoguider. The autoguider will be functional and ready to go as soon as you plug it in. Please refer to the appropriate manual from the manufacturer for operation of the autoguider.

We offer cables for all SBIG cameras. Please refer to our price list or call for further information.

+6V Connector

This 6-volt output accepts 3.5mm phono plugs. It is used primarily to power the Pentax 6x7 camera directly from the mount with a cord sold for that purpose (our part # CORD01).

N and S Switch

Select northern (N) or southern (S) hemisphere as needed. When you slide the switch to the opposite position, the tracking direction of the drive will reverse. The power cord must be removed and re-attached to make this work.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents ASTRO-PHYSICS Page Operation of the Mounting Page Features and Specifications Model 1200GTO Parts List Model GTOCP2Diagram Why Polar Alignment is ImportantIntroduction Compensation for the Earth’s rotationAssembly Instructions Before You Leave Home Gross Latitude AdjustmentAttach Pier Adapter to Pier Post Assemble Pier purchased separatelyAltitude and Azimuth Adjustments Rough polar alignment Assemble Polar Axis Assembly to Pier or TripodAssemble Declination Axis Flat Mounting Plate FP1800 Attach Mounting Plate purchased separatelyAttach Mounting Rings purchased separately Altitude and Azimuth AdjustmentsFine Polar Alignment Methods for fine polar alignmentDec. Damper Knobs Operation of the MountingDec. Clutch Knobs Balancing Your TelescopePage GTO Control Box Model GTOCP2 Servo Motor DriveFocus Connector RS-232 ConnectorsReticle Connector Autoguider ConnectorPrevent the Cables from Tangling Motor Cables Accessory CablesRemoving the GTO Control Box From 1200 Mount GTO Keypad Controller OperationTroubleshooting Mount Maintenance and AlignmentPage Fitting Declination Encoder Housing Installation of Encoders and Encoder Housings -1200 MountPeriodic Maintenance Fitting Right Ascension Encoder Housing

GTOCP2 specifications

The Socket Mobile GTOCP2 is a cutting-edge portable barcode scanner designed for businesses seeking efficiency and speed in their operations. Renowned for its streamlined functionality and user-friendly interface, the GTOCP2 elevates everyday tasks, offering features tailored to enhance productivity in various settings.

One of the main features of the GTOCP2 is its advanced scanning technology. Equipped with a high-performance 2D imager, this device is capable of quickly scanning a wide range of barcode formats, including QR codes and traditional 1D barcodes. This versatility enables users to capture information accurately and swiftly, bolstering workflow efficiency across diverse applications such as retail, inventory management, and healthcare.

The GTOCP2 also emphasizes connectivity, supporting Bluetooth technology for seamless pairing with smartphones, tablets, and other compatible devices. This wireless capability allows for greater mobility, as users can scan items from a distance without being tethered to a stationary system. Additionally, it's compatible with iOS, Android, and Windows devices, making it an ideal solution for a range of operating environments.

Ergonomics play a significant role in the design of the Socket Mobile GTOCP2. The scanner boasts a compact, lightweight form factor, ensuring comfortable handling during prolonged use. Its intuitive design promotes ease of use, allowing both experienced and novice users to operate it with minimal training. The device also features an adjustable scanning angle, facilitating efficient scanning in various scenarios.

Another noteworthy characteristic of the GTOCP2 is its durability. Constructed to endure the rigors of everyday use in busy environments, it meets IP54 standards for dust and moisture resistance. This durability ensures that the device remains functional even in challenging conditions, making it a reliable choice for industries that demand tough, resilient equipment.

Power management is another area where the GTOCP2 shines. The device is equipped with a long-lasting rechargeable battery, allowing for extensive usage between charges. This feature is particularly beneficial for on-the-go operations, where downtime can lead to decreased productivity.

In summary, the Socket Mobile GTOCP2 stands out for its exceptional scanning capabilities, strong wireless connectivity, ergonomic design, durability, and efficient power management. It is an excellent investment for businesses looking to improve their operational efficiency and streamline their processes, providing a reliable solution that caters to various industry needs.
Top Page Image Contents