Newcon Optik DN483, DN482 technical specifications Warranty, Customer Support

Page 2

IMPORTANT INFORMATION

Read prior to activation

You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted.

NEVER disassemble the unit. This device contains high voltage, which may be hazardous to your health!

NEVER aim active unit at intense light sources (i.e. lights, headlamps, campfires, the moon, etc.)

NEVER reverse the polarity of a battery

NEVER connect the unit to external power sources

ALWAYS remove batteries when not in use for a long period

ALWAYS keep the objective lenses covered when not in use

ALWAYS store in a warm dry place when not in use

FEATURES OF THE DN482/483 NIGHT-VISION SCOPE

Long range of vision (400-700 m)

High photo cathode sensitivity for low light levels (10-3-10-4Lux - cloudy night sky).

High resolution 18 mm Image Intensifier Tube and special light-collecting optics provide bright, sharp image of consistent quality in the center and on the edges

Recoil proof at large caliber rifles (bullet output energy up to 6500 J)

Lit reticle with manual brightness adjustment

High image quality within the whole field of view

11. WARRANTY

NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of manufacturing. Should your Newcon product prove defective during this period, please bring the product securely packaged in its original container or an equivalent, along with proof of the date of original purchase, to your Newcon Dealer. Newcon will repair (or at its option replace), the product or part thereof, which, on inspection by Newcon, is found to be defective in materials or workmanship.

What This Warranty Does Not Cover:

NEWCON is not responsible for warranty service should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, damage caused by disasters such as fire, flood, lightning, improper electrical current, or service other than by a NEWCON Authorized Service. Postage, insurance, or shipping costs incurred in presenting your NEWCON product for warranty service are your responsibility. Please include a check or money order made out to NEWCON OPTIK for the amount of $10.00 to cover shipping and handling. This covers products shipped in USA or Canada only.

12. CUSTOMER SUPPORT

Should you experience any difficulties with your Newcon OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or Toll free at 1-877- 398-6666. Our operating hours are 9am-5pm, Monday - Friday, Standard East Time. At no time should equipment be sent back to Newcon without following the instructions of our technical support department.

Newcon accepts no responsibility for unauthorized returns.

To locate NEWCON Authorized Dealer call: Tel: (416) 663-6963 Fax: (416) 663-9065

Email: NEWCONSALES@NEWCON-OPTIK.COM

INTERNET: http://WWW.NEWCON-OPTIK.COM

The defective products should be shipped to:

In USA: 3310 Prospect Ave. Cleveland, OH 44115

In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada International: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada

19

2

Image 2
Contents DN482/483 Warranty Customer SupportContents Precautions Storage and Maintenance InstructionsExternal Appearance of the Device Taking Photos and Video Shooting Technical CharacteristicsPreparation of the device for photo shooting Supplied Accessories Adjustment of the Scope on the RifleType and dimensions of the reticle Battery installationTesting of operation in a daytime Operation at nightInstallation Rules Installation of the device is performed as followsInstalling on a Hunting Rifle Variant I Adapter rail with Standard Prism typeVariant II Adapter rail with 7/8’’ Weaver prism type