Newcon Optik NZT1-M2 operation manual Acceptance Certificate, Model NZT-1M2

Page 3

11.ACCEPTANCE CERTIFICATE

NIGHT VISION DEVICE

Serial Number _______________________________

Model _NZT-1M2_____________________________

corresponds to technical conditions ADSH 3.807.020 TU and is admitted for use.

Date of production -____________________

Place for seal

Quality inspector ____________________

(signature)

18

NEVER disassemble the unit. This device contains high voltage, which may be hazardous to your health!

NEVER expose the opened objective lens of an active unit in daylight. (Note: 1st generation units will still remain active for a few minutes after switching the unit off). At daytime objective lens must be covered by caps. There is a tiny hole in the cap to provide enough light for day time operation. It is allowed to turn on the unit at daytime, but the lenses must be covered by caps.

NEVER aim active unit at intense light sources (i.e. lights, headlamps, campfires, the moon, etc.)

NEVER reverse the polarity of a battery

NEVER connect the unit to external power sources

ALWAYS remove batteries when not in use for a long period

3

Image 3
Contents NZT1-M2 Important Information ContentsModel NZT-1M2 Acceptance CertificateCustomer Support Features Warranty PrecautionsName Quantity TroubleshootingPhotography ComponentsPic Specifications of NZT1-M2Construction Using the NZT1-M2 with CameraAT Insufficient Ambient Illumination AT Moon Light