Newcon Optik NZT1-M2 operation manual Photography, Troubleshooting, Components, Name Quantity

Photography

When using the NZT1-M2 for photography, you are not supposed to obtain the same quality of pictures as taken in the daytime. But you will have the possibility to get an image of the object that normally could not be seen in the dark by the naked eye.

The user has a wide range of possibilities for experiments in the photography field by selecting different photo materials and changing of optics. Quality of pictures taken with a new lens or eyepiece may be estimated approximately by the object’s image when observing through the view-finder of your SLR cameral.

8. TROUBLESHOOTING

The scope does not work.

Check that the batteries are installed properly.

Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones.

The image does not appear in focus.

Bring the inspected object to the center of the image. Turning the eye-piece (9) adjust to achieve the clearest image on the screen. Then obtain the most clear-cut image of the object focusing with ring,(5). Repeat the steps of focusing if necessary

If the view still does not seem in focus, clean the lenses; they could be foggy or dusty.14

3. COMPONENTS

NZT1-M2 is supplied with the following components:

NAME	QUANTITY
NZT1-M2 unit	1
Case	1
Carrying strap	1
Lens caps	1
AP-7 I/R illuminator	1
AP-7 lens cover	1
Tripod doubler	1
Lens cloth	1
Camera adapter	1
Byonet adapter (optional)	1
Manual	1
Warranty Registration Card	1