Meade Telescope, LXD 75 instruction manual Setup Menu Daylight SAVING

Page 30

Tip:

The Reverse L/R and U/D functions are useful if you are observing in the Southern hemisphere.

Do you want to learn how to perform the periodic error correction proce- dure? See SMART DRIVE, page 56.

Tip:

If the "ENTER to Sync" feature is accessed by mistake (holding the ENTER key for more than 2 seconds), press MODE to return to the previous screen.

Want to learn more about adding and editing sites? See page 32.

Time Zone

Shift

Atlantic

-4 Hours

Eastern

-5 Hours

Central

-6 Hours

Mountain

-7

Hours

Pacific

-8

Hours

Alaska

-9

Hours

Hawaii

-10

Hours

Table 1: Time Zone Shift.

a.Sidereal: The default tracking setting for Autostar; sidereal rate is the stan- dard rate at which stars move from East to West across the sky due to the rotation of the Earth.

b.Lunar: Choose this option to properly track the Moon over long observing sessions.

c.Custom: Allows entry of user-defined tracking rates.

Reverse L/R: Reverses the functions of the Left and Right Arrow keys (i.e., the Right key moves the telescope to the left).

Reverse U/D: Reverses the functions of the Up and Down Arrow keys (i.e., the Up key moves the telescope down).

Quiet Slew: Sets the maximum slew rate to 1.5° for quieter operation.

Max Elevation: Allows you to enter a value in degrees that sets a limit as to how far the optical tube can swing upward during a programmed slew. (Note that it does not prevent you from performing a manual slew past this limit.) This is use- ful when you have a camera or other peripheral attached to the telescope—you can prevent it from striking the telescope base.

Min AOS (Acquisition of Signal): Allows you enter a value in degrees. This value represents the altitude at which your telescope begins to slew when acquiring a satellite track. This is useful when you are observing satellites, but a tall tree or building is obstructing the telescope. For example, you might begin to track the satellite at 15° altitude, instead of 5°. See OBSERVING SATELLITES, page 34, for more information about satellites.

Calibrate Motor: If the telescope motors appear to have a problem, use this option to retest the motors before performing a Reset. This option is also used if an Autostar unit is moved between telescopes, to match Autostar to the new tel- escope. To calibrate the motors, select this option and press ENTER.

Smart Drive: Allows you to perform periodic error correction (PEC) on the R.A. drive worm gear. Must be performed with a high-power reticle (eg., 9mm).

High Precision: If High Precision is turned on, when looking for a faint celestial object (i.e., a nebula or galaxy), Autostar first slews to a nearby bright star and displays "ENTER to Sync." Center the star in the eyepiece, then press ENTER. At that point the telescope has a high precision alignment to that part of the sky and it then slews to the object that was originally requested.

Targets switches between Astronomical targets and Terrestrial targets. If "Astronomical" is selected, the telescope tracking motor is activated and any object you observe will remain centered in the eyepiece. If "Terrestrial" is selected, the track- ing motor is turned off. To learn how to track an object automatically, see page 18.

Site provides access to several options including:

Select: Displays the currently selected observing site. Use the Scroll keys to cycle through all available sites (see ADD below). Press ENTER when the site you wish to select displays. Use this option when you move to a different geo- graphic location.

Add: Allows you to add new observing sites to the database (up to six sites may be stored). Scroll through the list of Countries/States. Press ENTER when the site you wish to add displays. Then choose the desired city in the same manner.

Delete: Deletes a stored site from the database.

Edit: Edits a selected site, including: the name, latitude, longitude, and time zone. Time Zone refers to the Greenwich Mean Time (GMT) time zone shift. Users West of Greenwich, England use “-” hours, East of Greenwich use “+” hours. For the United States, look up the time zone shift in Table 1.

Note: Autostar compensates for daylight savings time, if selected. See

SETUP MENU: DAYLIGHT SAVING, page 29.

Owner Info accesses the owner information menu, including:

Name: Users may enter both their first and last names using the Up and Down Arrow keys to cycle through the alphabet. Use the Right and Left Arrow keys to move through the text. Press ENTER when the entry is complete.

30

Image 30
Contents LXD 75 -Series Telescopes Page Contents Telescope Features BC1 g f eD E F LXD75-SeriesYour Personal Window to the Universe $ Computer Control Panel see e LXD75 Tips Autostar Features FeaturesTour the Cosmos with Just the Push of a Button Tip Accessories How to Assemble Your TelescopeTelescope Assembly Getting StartedViewfinder assembly Newtonian reflector models C D E F Balancing the TelescopeAligning the Viewfinder Choosing an EyepieceToo Much Power? Observing by Moving the Telescope ManuallyActivate the Arrow Keys Autostar Models Only Slew Speeds Autostar Models OnlyTracking Objects Setting the Polar Home PositionObserve the Moon 16bObserve a Star using the Automatic Tracking Feature Using Autostars GO to Capabilities Autostar Models OnlyMoving Through Autostar’s Menus Autostar Models Only Initializing Autostar Autostar Models OnlyTraining the Drive Autostar Models Only Easy Alignment Autostar Models Only Go To Saturn Autostar Models OnlyUsing the Guided Tour Autostar Models Only Planet Saturn is over 800 million miles from the EarthAutostar Navigation Exercise To Calculate Sunset timeEntering Data into Autostar Navigating AutostarAutostars Menus Select Item ObjectMenus Object MenuUtilities Menu Event MenuGlossary Menu LXD75-SeriesSetup Menu EnterObserving Considerations Setup Menu Daylight SAVING, Surf the Web Adding Observing Sites To Add a Site to the user-defined site listTo Edit a Site Using Autostar to Find Objects Not in the Libraries To GO to a user-entered objectObserving Satellites LandmarksTo Add a landmark to the database To Check on the Available Memory To Select a landmark from the databaseTo perform a Landmark Survey Photography Few tips on photography with the LXD75-SeriestelescopesPhotography with Meade’s Autostar Suite Optional Accessories 10 f/4Series 4000 Photo-Visual Optional Autostar handbox for EC model users Maintenance General MaintenanceD e f g Page Defocused star images. Misaligned 1, 2, Aligned Page Page Specifications 5 Model SN-6AT, SN-6EC Specifications4 Model SN-8AT, SN-8EC Specifications 10 f/4 Model SN-10AT Specifications 9.3 Model AR-5AT, AR-5EC Specifications8 Model AR-6AT Specifications 10 Model SC-8AT Specifications 5 Model N-6EC SpecificationsMeade Customer Service Autostar SpecificationsAutostar Dimensions Inspecting the OpticsSetting Circles Appendix a Celestial CoordinatesOne-Star Polar Alignment Locating the Celestial PolePolar Alignment Two-Star Polar AlignmentEnhancement Methods Method #1 Three-Star Alignment Using AutostarPolar Alignment Viewfinder To perform the Three-Star AlignmentMethod 2 Axis Alignment Procedures Procedure #1 To correct for attitude misalignmentProcedure #2 To correct for elevation misalignment Position aMethod 3 Axis Alignment Using Autostar TipsPEC Train Menu Option Method #4 Smart Drive Training Periodic Error CorrectionPEC Update Menu Option PEC Erase Menu OptionCity State/Prov./Country Latitude Appendix C Latitude ChartLatitude Chart for Major Cities of the World City Country LatitudeAppendix D EC Handbox To move the telescope using the Electronic Controller Modes of OperationSlew Speeds Tracking Rates Changing the Polar Mode Optional Autostar Computer Controller for LXD75 EC UsersHow to Attach the Optical Tube to the Mount Mounting the SC bracket and optical tube to the mountObjects in Space Appendix F Basic AstronomyAutostar Glossary MoonPlanets Deep-Sky ObjectsFurther Study Page Meade Limited Warranty
Related manuals
Manual 68 pages 38.91 Kb

Telescope, LXD 75 specifications

The Meade LXD 75 is an advanced telescope mount designed for both amateur and professional astronomers looking to explore the wonders of the night sky. Known for its precision and ease of use, the LXD 75 offers several features and technologies that make it a standout choice for astrophotography and visual observation alike.

At the heart of the Meade LXD 75 is its robust equatorial mount, which provides stable tracking of celestial objects. This mount is both lightweight and durable, allowing for easy transport to observing sites. The equatorial design is especially beneficial for astrophotography, as it compensates for the Earth's rotation, enabling longer exposure times without the trailing effects commonly associated with less sophisticated mounts.

One of the most notable features of the LXD 75 is its dual-axis tracking system. This system allows users to electronically control the telescope's movements along both the right ascension and declination axes. The built-in Data Sky control panel is user-friendly, offering intuitive access to a wealth of astronomical data, including over 30,000 celestial objects. This makes locating and tracking objects in the sky simpler and more efficient.

The LXD 75 also supports a variety of telescope configurations, accommodating optical tubes up to 10 inches in diameter. This versatility makes it suitable for a range of viewing preferences, from planetary observations to deep-sky astrophotography. The mount's heavy-duty construction ensures it can handle the weight of larger telescopes while maintaining stability.

In terms of technology, the Meade LXD 75 is equipped with AutoStar computer technology. This innovative feature enables automatic location and tracking of celestial bodies using a simple pointing and clicking interface. Users can also create custom observing lists, making it easier to plan and execute dedicated viewing sessions.

Additionally, the LXD 75 boasts robust connectivity options, including the ability to integrate with a wide range of imaging software and accessories, making it a great choice for those interested in advanced astrophotography techniques. The mount's compatibility with Meade's own range of cameras and filters further enhances its potential for capturing stunning images of the universe.

In conclusion, the Meade LXD 75 is a well-rounded telescope mount that combines advanced technology with user-friendly features. Its equatorial design, dual-axis tracking, and AutoStar system make it an excellent choice for both novice and experienced astronomers. Whether for visual observation or astrophotography, the LXD 75 offers the performance and versatility to enhance any stargazing experience.