Meade Telescope, LXD 75 Observing Satellites, Landmarks, To Add a landmark to the database

Page 34

Tip:

To easiest way to get satellite information is to go to the Meade website and click “Autostar Update” in the Customer Support sec- tion. Follow the on-screen instructions to automatically download the information to your Autostar handbox.

The optional #505 Astrofinder Software and Cable Connector Kit is required to use the Autostar Update Utility.

Tip:

To use the Landmark func- tion, the telescope must be located and aligned exactly as when the landmark(s) was added to the database.

Observing Satellites

In this procedure, you will prepare your telescope to observe a satellite pass.

1.Navigate to the "Object: Satellite" menu option and press ENTER.

2.Use the Scroll keys to scroll through the list of satellites.

3.Select a satellite from the list and press ENTER.

4."Calculating...." and then "Tracking..." displays. If the satellite is going to make a pass, "Located" displays.

5.Use the Scroll keys to display data about the pass: aos – acquisition of signal and los – loss of signal. If you subtract the aos from the los, you can calculate how long the satellite will be visible. Location information also displays.

6."Alarm" displays after the location information. Press ENTER and Autostar auto- matically sets the alarm to sound a minute before the satellite's scheduled appearance. You may return to regular observations until the alarm goes off.

7.When the alarm goes off, return to the Satellite menu and press a Scroll key until the desired satellite is on the top line of the display.

8.Press GO TO. Autostar slews the telescope to where the satellite should appear. The motor drive stops and a countdown is displayed.

Note: If the scheduled appearance position of the satellite is obstructed (i.e., by a building, tree, or hill), press ENTER and Autostar starts to move the telescope along the expected satellite track. When the track clears the obstruction, press ENTER again to pause the telescope, then continue with this procedure.

9.With about 20 seconds left on the countdown timer, start watching through the tel- escope viewfinder for the satellite to enter the field of view.

10.When the satellite enters the viewfinder field of view, press ENTER. The tele- scope starts to track with the satellite.

11.Use the Autostar Arrow keys to center the object in the viewfinder, then look through the eyepiece to view the object.

Satellite orbits change and new satellites (including the Space Shuttle) are launched. Visit the Meade website (www.meade.com) approximately once a month to get updated information and instructions on how to download this data to Autostar. If orbital parameters are more than one month old, the satellite pass may not happen at the time predicted by Autostar. Downloading requires the optional #505 AstroFinder™ Software and Cable Connector Kit. See OPTIONAL ACCESSORIES, page 38.

Note: Satellite observing is an exciting challenge. Most satellites are in low orbit, travelling at approximately 17,500 mph. When visible, they move quickly across the sky and are only in the field of view for a few minutes, requiring Autostar to slew the telescope rapidly. Best viewing is near Sunrise or Sunset when the sky is still dark. Viewing in the middle of the night can be problematic because the satellite may pass overhead, but not be visible as it is in the Earth's shadow.

Landmarks

This menu option allows you to define and store terrestrial objects in the Landmark database. First, a landmark needs to be stored in memory using the "Landmark: Add" option. To view a landmark, use the "Landmark: Select" option. Landmarks may also be viewed using the "Landmark Survey" option in the Utilities menu.

To Add a landmark to the database:

In this procedure, you will store the location of terrestrial landmarks in Autostar's memory.

1.Note for future reference where the telescope is located. Select an easily recog- nizable reference object and center the object in the telescope eyepiece. Each time you wish to view landmarks you have added to the database, setup the telescope in this location and center the reference object in the eyepiece. If you do not use a consistent point of reference, the telescope will not be able to locate the objects you have added to the database.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents LXD 75 -Series Telescopes Page Contents Telescope Features BC1 g f eD E F LXD75-SeriesYour Personal Window to the Universe $ Computer Control Panel see e LXD75 Tips Features Autostar FeaturesTour the Cosmos with Just the Push of a Button Tip Accessories How to Assemble Your TelescopeTelescope Assembly Getting StartedViewfinder assembly Newtonian reflector models C D E F Balancing the TelescopeAligning the Viewfinder Choosing an EyepieceToo Much Power? Observing by Moving the Telescope ManuallyActivate the Arrow Keys Autostar Models Only Slew Speeds Autostar Models OnlyTracking Objects Setting the Polar Home PositionObserve the Moon 16bObserve a Star using the Automatic Tracking Feature Using Autostars GO to Capabilities Autostar Models OnlyMoving Through Autostar’s Menus Autostar Models Only Initializing Autostar Autostar Models OnlyTraining the Drive Autostar Models Only Easy Alignment Autostar Models Only Go To Saturn Autostar Models OnlyUsing the Guided Tour Autostar Models Only Planet Saturn is over 800 million miles from the EarthAutostar Navigation Exercise To Calculate Sunset timeEntering Data into Autostar Navigating AutostarAutostars Menus Select Item ObjectMenus Object MenuUtilities Menu Event MenuGlossary Menu LXD75-SeriesSetup Menu EnterObserving Considerations Setup Menu Daylight SAVING, Surf the Web To Add a Site to the user-defined site list Adding Observing SitesTo Edit a Site Using Autostar to Find Objects Not in the Libraries To GO to a user-entered objectLandmarks Observing SatellitesTo Add a landmark to the database To Select a landmark from the database To Check on the Available MemoryTo perform a Landmark Survey Few tips on photography with the LXD75-Seriestelescopes PhotographyPhotography with Meade’s Autostar Suite Optional Accessories 10 f/4Series 4000 Photo-Visual Optional Autostar handbox for EC model users Maintenance General MaintenanceD e f g Page Defocused star images. Misaligned 1, 2, Aligned Page Page 5 Model SN-6AT, SN-6EC Specifications Specifications4 Model SN-8AT, SN-8EC Specifications 9.3 Model AR-5AT, AR-5EC Specifications 10 f/4 Model SN-10AT Specifications8 Model AR-6AT Specifications 10 Model SC-8AT Specifications 5 Model N-6EC SpecificationsMeade Customer Service Autostar SpecificationsAutostar Dimensions Inspecting the OpticsSetting Circles Appendix a Celestial CoordinatesOne-Star Polar Alignment Locating the Celestial PolePolar Alignment Two-Star Polar AlignmentEnhancement Methods Method #1 Three-Star Alignment Using AutostarPolar Alignment Viewfinder To perform the Three-Star AlignmentMethod 2 Axis Alignment Procedures Procedure #1 To correct for attitude misalignmentProcedure #2 To correct for elevation misalignment Position aMethod 3 Axis Alignment Using Autostar TipsPEC Train Menu Option Method #4 Smart Drive Training Periodic Error CorrectionPEC Update Menu Option PEC Erase Menu OptionCity State/Prov./Country Latitude Appendix C Latitude ChartLatitude Chart for Major Cities of the World City Country LatitudeAppendix D EC Handbox Modes of Operation To move the telescope using the Electronic ControllerSlew Speeds Tracking Rates Changing the Polar Mode Optional Autostar Computer Controller for LXD75 EC UsersHow to Attach the Optical Tube to the Mount Mounting the SC bracket and optical tube to the mountObjects in Space Appendix F Basic AstronomyAutostar Glossary MoonPlanets Deep-Sky ObjectsFurther Study Page Meade Limited Warranty
Related manuals
Manual 68 pages 38.91 Kb

Telescope, LXD 75 specifications

The Meade LXD 75 is an advanced telescope mount designed for both amateur and professional astronomers looking to explore the wonders of the night sky. Known for its precision and ease of use, the LXD 75 offers several features and technologies that make it a standout choice for astrophotography and visual observation alike.

At the heart of the Meade LXD 75 is its robust equatorial mount, which provides stable tracking of celestial objects. This mount is both lightweight and durable, allowing for easy transport to observing sites. The equatorial design is especially beneficial for astrophotography, as it compensates for the Earth's rotation, enabling longer exposure times without the trailing effects commonly associated with less sophisticated mounts.

One of the most notable features of the LXD 75 is its dual-axis tracking system. This system allows users to electronically control the telescope's movements along both the right ascension and declination axes. The built-in Data Sky control panel is user-friendly, offering intuitive access to a wealth of astronomical data, including over 30,000 celestial objects. This makes locating and tracking objects in the sky simpler and more efficient.

The LXD 75 also supports a variety of telescope configurations, accommodating optical tubes up to 10 inches in diameter. This versatility makes it suitable for a range of viewing preferences, from planetary observations to deep-sky astrophotography. The mount's heavy-duty construction ensures it can handle the weight of larger telescopes while maintaining stability.

In terms of technology, the Meade LXD 75 is equipped with AutoStar computer technology. This innovative feature enables automatic location and tracking of celestial bodies using a simple pointing and clicking interface. Users can also create custom observing lists, making it easier to plan and execute dedicated viewing sessions.

Additionally, the LXD 75 boasts robust connectivity options, including the ability to integrate with a wide range of imaging software and accessories, making it a great choice for those interested in advanced astrophotography techniques. The mount's compatibility with Meade's own range of cameras and filters further enhances its potential for capturing stunning images of the universe.

In conclusion, the Meade LXD 75 is a well-rounded telescope mount that combines advanced technology with user-friendly features. Its equatorial design, dual-axis tracking, and AutoStar system make it an excellent choice for both novice and experienced astronomers. Whether for visual observation or astrophotography, the LXD 75 offers the performance and versatility to enhance any stargazing experience.
Top Page Image Contents