16" Deluxe Model
OTA
Truss tubes
Secondary Mirror Support Mirror
Focal length Focal ratio Resolving Power Limiting visual magnitude Focuser
Mount Eyepiece tray Counterweight Eyepiece Dust Cover Finder Computer Software Assembled OTA weight Assembled Mount weight
Total Assembled telescope wt.
Open truss design. Upper cage metal tube containing spider and secondary mirror holder, focuser with attachment points for truss tubes. Lower metal tube containing mirror cell, altitude bear- ings, battery powered fan, with truss tube attachment castings and captive bolts and knobs.
All 16 inch models have a triangular ground plate. Silver anodized aluminum with attachment hardware and captive bolts. Machined aluminum altitude bearings.
0.45 arc seconds
14.5
10 to 1
Swivel base with Teflon bearings for azimuth.
For one 2” and three 1.25” eyepieces mounted on one side of the base.
None
Meade 26mm Super Plössl
To fit over primary mirror inside of lower tube. Standard red dot
74 lbs.
54 lbs.
128 lbs.
Looking at or near the Sun will cause irreversable damage to your eye. Do not point | 19 |
| |
this telescope at or near the Sun. Do not look through the telescope as it is moving. |
|