Meade LXD 75-Series instruction manual Setup Menu Daylight SAVING

Tip:

The Reverse L/R and U/D functions are useful if you are observing in the Southern hemisphere.

Do you want to learn how to perform the periodic error correction proce- dure? See SMART MOUNT, page 56.

Tip:

If the "ENTER to Sync" feature is accessed by mistake (holding the ENTER key for more than 2 seconds), press MODE to return to the previous screen.

Want to learn more about adding and editing sites? See page 32.

Time Zone	Shift
Atlantic	-4 Hours
Eastern	-5 Hours
Central	-6 Hours
Mountain	-7	Hours
Pacific	-8	Hours
Alaska	-9	Hours
Hawaii	-10	Hours

Table 1: Time Zone Shift.

a.Sidereal: The default tracking setting for Autostar; sidereal rate is the stan- dard rate at which stars move from East to West across the sky due to the rotation of the Earth.

b.Lunar: Choose this option to properly track the Moon over long observing sessions.

c.Custom: Allows entry of user-defined tracking rates.

■Reverse L/R: Reverses the functions of the Left and Right Arrow keys (i.e., the Right key moves the telescope to the left).

■Reverse U/D: Reverses the functions of the Up and Down Arrow keys (i.e., the Up key moves the telescope down).

■Quiet Slew: Sets the maximum slew rate to 1.5° for quieter operation.

■Max Elevation: Allows you to enter a value in degrees that sets a limit as to how far the optical tube can swing upward during a programmed slew. (Note that it does not prevent you from performing a manual slew past this limit.) This is use- ful when you have a camera or other peripheral attached to the telescope—you can prevent it from striking the telescope base.

■Min AOS (Acquisition of Signal): Allows you enter a value in degrees. This value represents the altitude at which your telescope begins to slew when acquiring a satellite track. This is useful when you are observing satellites, but a tall tree or building is obstructing the telescope. For example, you might begin to track the satellite at 15° altitude, instead of 5°. See OBSERVING SATELLITES, page 34, for more information about satellites.

■Calibrate Motor: If the telescope motors appear to have a problem, use this option to retest the motors before performing a Reset. This option is also used if an Autostar unit is moved between telescopes, to match Autostar to the new tel- escope. To calibrate the motors, select this option and press ENTER.

■Smart Mount: Allows you to perform periodic error correction (PEC) on the R.A. drive worm gear. Must be performed with a high-power reticle (eg., 9mm).

■High Precision: If High Precision is turned on, when looking for a faint celestial object (i.e., a nebula or galaxy), Autostar first slews to a nearby bright star and displays "ENTER to Sync." Center the star in the eyepiece, then press ENTER. At that point the telescope has a high precision alignment to that part of the sky and it then slews to the object that was originally requested.

Targets switches between Astronomical targets and Terrestrial targets. If "Astronomical" is selected, the telescope tracking motor is activated and any object you observe will remain centered in the eyepiece. If "Terrestrial" is selected, the track- ing motor is turned off. To learn how to track an object automatically, see page 18.

Site provides access to several options including:

■Select: Displays the currently selected observing site. Use the Scroll keys to cycle through all available sites (see ADD below). Press ENTER when the site you wish to select displays. Use this option when you move to a different geo- graphic location.

■Add: Allows you to add new observing sites to the database (up to six sites may be stored). Scroll through the list of Countries/States. Press ENTER when the site you wish to add displays. Then choose the desired city in the same manner.

■Delete: Deletes a stored site from the database.

■Edit: Edits a selected site, including: the name, latitude, longitude, and time zone. Time Zone refers to the Greenwich Mean Time (GMT) time zone shift. Users West of Greenwich, England use “-” hours, East of Greenwich use “+” hours. For the United States, look up the time zone shift in Table 1.

Note: Autostar compensates for daylight savings time, if selected. See

SETUP MENU: DAYLIGHT SAVING, page 29.

Owner Info accesses the owner information menu, including:

■Name: Users may enter both their first and last names using the Up and Down Arrow keys to cycle through the alphabet. Use the Right and Left Arrow keys to move through the text. Press ENTER when the entry is complete.

30