Cisco Systems DRX-701ES manual Controls and connectors, Front panel, Rear panel

Controls and connectors

This section provides information on the controls and connectors available on the front and rear panels of your DRX-701ES. For information on the remote control, see page 8.

Front panel

Power button switches the unit on or returns it to standby. Indicator LED shows when the unit is switched on.

Phones socket for connection to headphones

Stereo LED indicates when a stereo station is being received, see Selecting a station, page 6

Secondary LED indicates when a secondary service is selected or is available, see Selecting a station, page 6

Remote LED indicates remote control activity

Remote sensor picks up the infrared signal from the remote

Backlit LCD display

Standby LED indicates that the unit is in standby mode with power connected

Brightness button changes the display brightness

Setup button enables access to advanced setup options, see page 7

Display button changes the main display mode, see Changing the display mode, page 6

Autotune button enables an automatic scan to find and store all stations available in your area

Tuning knob, turn to scroll through and push to select stations and menu options, see pages 6 and 7

Rear panel

AERIAL connector

USB port enables software upgrades, see Connecting to a USB device, page 4

S/PDIF co-axial digital output, see Connecting to digital devices, page 4

S/PDIF optical digital output, see Connecting to digital devices, page 4

RDI (Receiver Data Interface) socket, see Connecting to an external decoder, page 4

INPUT loop through input for AM/FM tuner

OUTPUT to amplifier line-level stereo (analogue)

Power socket and fuse drawer for connecting to power lead, see Connecting to the power supply, page 4

3