
Using your DRX-701ES
This section provides information on using your
Switching on and off
Before switching on for the first time, check all connections and ensure that the volume on your amplifier is low.
Push the Power button to switch the unit on or off. The Power LED and LCD screen will light up when the unit is on.
Tuning
Tuning the
Tuning for the first time
When you switch on your
If stations are found during the autotune
The stations will be stored in alphanumeric order, the first station on the list will be selected and you will hear it through your speakers. To listen to other stations, see Selecting a station page 6.
If no stations are found during the autotune
‘No stations available’ will be shown on the display for a few seconds and then you see a menu of options.
Use the large tuning knob to scroll through the following options and push it to select that option.
Tuning aid - See Tuning aid, page 7, for details of using the tuning aid to improve reception.
Autotune local - See Retuning your unit below for details of the local autotune option.
Autotune full - See Retuning your unit below for details of the full autotune option.
Retuning your unit
You can
Autotune local - scans all frequencies in the UK channel allocation. This should only take a few seconds.
Autotune full - scans the full range of digital frequencies in Band III. This may take a minute or more.
1.Ensure your
2.Push and release the Autotune button once for local scan or hold down for around two seconds for a full scan. Note You can cancel Autotune by pushing the Autotune button again during the tuning process.
The display will indicate tuning is underway and the number of stations found on the top line. When finished, the
If no stations are found, you see the message ‘No stations available’ and the display shows an option menu, see If no stations are found during the autotune above for details of this menu. Check your aerial is securely connected and correctly positioned and try one of the available tuning options.
5