Cerwin-Vega Optimize Your Listening Experience with Cerwin Vega Powered Subwoofers

Page 5

2.3control descriptions (cont.)

Figure 1

7.PHASE: This switch allows you to compensate for having the subwoofer in a different location than the main speakers. This control allows the signal to be delayed 180 degrees so the output of the subwoofer will blend in with the main speakers. Slide the PHASE switch to “180.” At the listening position, listen to the mid bass output. If it sounds weak, set PHASE back to “0.”

8.POWER LED: Power indicator lamp. Glows green in “ON” mode if audio signal is present. Glows red in both “OFF” mode and “ON” mode if receiving AC power, and if audio signal is not present after approximately 30 minutes.

9.POWER: Two-position power switch. In the “ON” mode, the subwoofer’s amplifier is automatically activated if an audio signal is present and will automatically become inactive when there is no audio signal present after approximately 30 minutes. In the “OFF” mode, power is shut off to the amplifier.

10.VOLTAGE SELECTION: XLS products have 120 V and 240 V capabilities and are shipped with voltage specific fuses:

(110 V – 120 V – T6.3AL / 220 V – 240 V – T3.15ALAC).

Warning: Severe damage may result from improperly selected voltage. Refer to qualified service personnel to select voltage.

11.POWER CORD RECEPTACLE: Connect the IEC cord to this receptacle (supplied with the subwoofer). If the IEC cord does not fit in your AC outlet, please purchase another AC cord from your audio dealer or electrical supply store.

12.REPLACEABLE FUSE: Protects system from overload. Refer to qualified service personnel to change the fuse.

2.4PLACEMENT

Your XLS Series Powered Subwoofer produces low frequencies which are omnidirectional. As a result, placement requirements for your subwoofer are flexible and subject to your listening room’s acoustic characteristics. To determine the best position for your subwoofer, start by positioning it along the same wall, or plane, as your main speakers. Experiment with various locations until you find the location that sounds best to you.

Note: Typically, your powered subwoofer will sound best when placed between the front main satellites.

Caution! Do not place heavy objects of any type, such as televisions on top of any Cerwin-Vega! speaker unless otherwise recommended by Cerwin-Vega! XLS Series speakers are for residential applications only.

* Refer to the owner’s manual provided by your main speaker manufacturer to determine your main speaker’s low-end frequency response.

2

Image 5
Contents XLS-12S & XLS-15S Subwoofers Cerwin-Vega’s Limited Warranty Explanation of Graphic Symbols Important safety instructions Important symbols and safety instructionsCoNTENTS Control descriptions PlacementSpeaker Level Connections Line Level ConnectionsSymptoms Causes Solutions TroubleshootingSpecifications

XLS-12S, XLS-15S specifications

Cerwin-Vega has long been recognized as a pioneer in high-performance audio gear, and their XLS-12S and XLS-15S subwoofers are perfect examples of this legacy. Designed to deliver deep, powerful bass that enhances any listening experience, these models stand out in the crowded subwoofer market.

The Cerwin-Vega XLS-12S features a 12-inch high-excursion driver, which allows for impressive bass performance with minimal distortion. Its integrated amplifier provides a robust output of 300 watts RMS, while peaking at an impressive 700 watts for those moments when impactful sound is paramount. The XLS-15S takes things a notch higher with a 15-inch driver, known for its increased cone area, enabling deeper bass extension and higher sound pressure levels, achieving a peak of 800 watts.

One of the standout technologies in both models is the use of Cerwin-Vega's innovative bass reflex design. This design not only improves the efficiency of the subwoofers but also maximizes the low-end response while reducing unwanted resonance. The rear-firing bass port further aids in delivering an enhanced bass experience, suitable for both movies and music, creating an immersive audio environment.

Another key characteristic of the XLS subwoofers is the adjustable crossover frequency. Users have full control over how much bass they want to add to their audio setup, ensuring it can be optimized for various room acoustics and personal preferences. Also equipped with stereo RCA inputs along with a speaker level input, these subwoofers can easily integrate into existing audio setups, whether they’re used for home theater systems or music listening.

Additionally, the durable cabinet design minimizes vibrations, enhancing the sound quality while allowing for easy placement in any room. The XLS-12S and XLS-15S are also designed with integrated handles for portability, making it simple for users to transport between spaces for events or gatherings.

In conclusion, the Cerwin-Vega XLS-12S and XLS-15S subwoofers embody a powerful combination of advanced technology, exceptional build quality, and versatile performance. Whether you're an audiophile looking to deepen your listening experience or someone who simply enjoys a good movie night with robust sound, these subwoofers are sure to impress with their explosive bass and dynamic capabilities.