Line Level Connections | Cerwin-Vega XLS-15S, XLS-12S instruction

3.CONNECTING YOUR SUBWOOFER

3.1LINE LEVEL CONNECTIONS

Connect the LFE Output of an A/V receiver to the LFE Input (1) of the XLS subwoofer, or connect the left and right line level outputs of an AV receiver to the left and right Line Level Inputs (2) of the XLS subwoofer. (Figure 2). See your A/V receiver’s bass management instructions for proper integration into your system.

Figure 2

3.2SPEAKER LEVEL CONNECTIONS

Connect the left and right speaker-level outputs of an A/V receiver to the Left and Right Speaker-Level Inputs (3) of the XLS subwoofer. Then connect the Left and Right Speaker Level Outputs (4) of the XLS subwoofer to the left and right speakers on your system. Remember to maintain left to left, right to right, (+) to (+) and (-) to (-) connections. (Figure 3).

Figure 3

Note: The signal coming from Speaker Level Inputs (3) through the Speaker Level Outputs (4) is high-pass filtered at 100 Hz*. This removes the bass below 100 Hz from your left and right speakers. The subwoofer is used to reproduce the frequencies below 100 Hz*.

*The passive high pass filter used in the speaker level output is dependent on your speaker impedance for the actual crossover frequency. Because of this, we recommend that you start with a crossover frequency (6) setting of 100 Hz, and then adjust Volume (5) and Phase

(7). If there is too little midbass, turn the crossover frequency up (6). If there is too much midbass, turn the crossover frequency down (6). Experimentation and listening are the keys to proper subwoofer integration.

XLS-12S, XLS-15S specifications

Cerwin-Vega has long been recognized as a pioneer in high-performance audio gear, and their XLS-12S and XLS-15S subwoofers are perfect examples of this legacy. Designed to deliver deep, powerful bass that enhances any listening experience, these models stand out in the crowded subwoofer market.

The Cerwin-Vega XLS-12S features a 12-inch high-excursion driver, which allows for impressive bass performance with minimal distortion. Its integrated amplifier provides a robust output of 300 watts RMS, while peaking at an impressive 700 watts for those moments when impactful sound is paramount. The XLS-15S takes things a notch higher with a 15-inch driver, known for its increased cone area, enabling deeper bass extension and higher sound pressure levels, achieving a peak of 800 watts.

One of the standout technologies in both models is the use of Cerwin-Vega's innovative bass reflex design. This design not only improves the efficiency of the subwoofers but also maximizes the low-end response while reducing unwanted resonance. The rear-firing bass port further aids in delivering an enhanced bass experience, suitable for both movies and music, creating an immersive audio environment.

Another key characteristic of the XLS subwoofers is the adjustable crossover frequency. Users have full control over how much bass they want to add to their audio setup, ensuring it can be optimized for various room acoustics and personal preferences. Also equipped with stereo RCA inputs along with a speaker level input, these subwoofers can easily integrate into existing audio setups, whether they’re used for home theater systems or music listening.

Additionally, the durable cabinet design minimizes vibrations, enhancing the sound quality while allowing for easy placement in any room. The XLS-12S and XLS-15S are also designed with integrated handles for portability, making it simple for users to transport between spaces for events or gatherings.

In conclusion, the Cerwin-Vega XLS-12S and XLS-15S subwoofers embody a powerful combination of advanced technology, exceptional build quality, and versatile performance. Whether you're an audiophile looking to deepen your listening experience or someone who simply enjoys a good movie night with robust sound, these subwoofers are sure to impress with their explosive bass and dynamic capabilities.