Large collimation knobs (x3)
Washers (x3)
Springs (x3)
Figure 4. The parts in the box containing the primary mirror and mirror cell.
Box #2: Primary Mirror and Cell (refer to Figure 4)
Qty. Description
1Primary mirror
1Mirror cell
3Collimation knobs
3Nylon washers (3/4" outer dia.)
3Springs
Box #3: Dobsonian Base (refer to Figure 5) Qty. Description
1Left panel
1Right panel
1Front panel
1Top baseplate
1Ground baseplate
2Side braces
6Base assembly wood screws (2" long, black)
12Captive base connecting bolts with hand knobs
1Handle
2Handle screws (hex head, 1.5" long)
2Handle washers (5/8" outer dia.)
1Crescent wrench
1Hex key (size 4mm)
3Plastic feet
3 Feet wood screws (1" long)
8Encoder wood screws (1/2" long)
12Rubber washers
12Spacers for connecting bolts (10mm long, 15mm dia.)
1 Insertion tube for rubber washers (~3" long)
3Counterweight attachment bolts (hex head, 1" long, black)
1 Brass azimuth bushing
1Azimuth axis bolt (hex head, 2.75" long)
2Fender washers (1" outer dia.)
1 Hex lock nut
4 Altitude bearing cylinders
4Altitude bearing cylinder screws (1.75" long, black)
1Vertical stop knob
5Vertical stop washers, thick (5/8" outer diameter, 1/16" thick)
2Vertical stop washers, thin (1/2" outer diameter, 1/32" thick)
3Azimuth encoder spacer washers, thick (0.35" outer dia., 0.032" thick)
1Eyepiece rack
2Eyepiece rack wood screws (3/4" long, black)
2Altitude tensioning/retaining knobs
1Tensioning knob Teflon washer (1" outer dia., white)
1Tensioning knob metal washer (1" outer dia.)
6