iOptron 8603 and 8604 Troubleshooting, Cannot seem to focus No image appears in the eyepiece

Page 26

7.3. Troubleshooting

The following suggestions may be helpful with operation of the SmartStar® Cube-A mount or telescope.

The power indicator light on the mount does not come on or there is no response when pressing hand controller’s arrow keys:

(1)Verify that the power switch on the mount is in the ON position.

(2)Verify that the hand controller cord is firmly connected to the HBX port on the mount, or switch the cord to the other HBX port.

(3)Check the power source, which include:

•Using the battery? Are the batteries installed correctly? Are the batteries fresh? How long have they been used? (frequent slew and GOTO will deplete battery power very quickly)

•Using AC or DC adapter? Check the plugs to the mount and to the power outlet.

•Using extension cord? Make sure the cord is in good condition. Power drop along the extension cord was known to cause the problem. Also check all the plugs and connections.

(4)If the telescope does not respond to commands, set the power switch to OFF and then back to ON.

(5)If the telescope does not slew after power is applied or if the motor quits or stalls, verify that there are no physical obstructions that would impede telescope movement.

Cannot seem to focus (No image appears in the eyepiece):

(1)Confirm that the dust cap has been removed from the telescope.

(2)Keep turning the focus knob. Your telescope has a fine focusing mechanism which allows you to focus an image very precisely. However, this means that you may have to rotate the focus knob 20 to 40 complete turns to achieve focus, particularly the first time you use your telescope. After that, fewer turns will be needed.

Images through the eyepiece appear unfocused or distorted:

(1)The magnification used may be too high for the seeing conditions. Back off to a lower power eyepiece.

(2)If inside a warm house or building, move outside. Interior air conditions may distort terrestrial (land) or celestial images, making it difficult, if not impossible, to obtain a sharp focus. For optimal viewing, use the telescope outside in the open air instead of observing through an open or closed window or screen.

(3)If viewing a land object on a warm day, heat waves distort the image.

(4)The optics within the telescope need time to adjust to the outside ambient temperature to provide the sharpest image. To "cool down" the optics, set the telescope outside for 10 to 15 minutes before observing begins.

Error Message “Warning! DEC. (or R.A.) driver motor over current. Please check balance.”

(1)Check if the mount or OTA is blocked by any obstructions.

(2)Try to operate the mount without an OTA.

(3)Check the power supply. This is a common reason for this message and unexpected slew behavior or movement. which include:

•Batteries: Are the batteries fresh? How long have they been used? (frequent slewing and GOTO will deplete battery power very quickly)

•AC or DC adapter: Check the plugs to the mount and to the power outlet.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents SmartStarCubeTM-A Series Mount and Telescopes Table of Content Never USE a Telescope to Look AT the SUN SmartStar CubeTM-A Series Features SmarStar CubeTM-A Series OverviewFor Model 8602 SmartStar CubeTM-A R80 Assembly Terms Telescope Assembly Preparing the TripodDo not plug non-iOptron accessories into the unit to For 90mm Maksutov-Cassegrain #8504………………………………… GoToNova 8401 Hand Controller Key DescriptionLCD Screen Level and Align the Mount Setting Up the MountGetting Started Level the MountSet Up Local Time and Site Info Press ENTER. Select Set Up Local TimeSet Mount Type Do not Count Daylight Saving TimeSet Anti-backlash Scroll down and select Set anti-backlashUsing your telescope Go to the MoonTurn Off the Mount Initial Star AlignmentOperate SmartStar CubeTM-A mount in EQ Mode Page Slew to an Object Use SmartStar CubeTM-A TelescopesManual Operation of a Telescope Sync to Target Electric FocuserSet Up Controller Set Language Three-Star Align Dis R.A axis errorAlign One Star AlignUser Object List Set Up TrackingPEC Option Auto GuideStorage and Transport Maintenance and ServicingMaintenance Troubleshooting Cannot seem to focus No image appears in the eyepieceIOptron Customer Service Page Refractor Telescope Appendix A. Technical SpecificationsSmartStar CubeTM-A Goto Mount Newtonian Reflector TelescopeAppendix B. GoToNova 8401 HC Menu Structure MenuPage Appendix C. GoToNova Star List GoToNova Deep Sky Object List5373 Messier Modern Constellations GoToNova Named Star List GoToNova Double Star List Appendix D. Set Up USB-PC Connection Install CP210x usb2com driverPage When finished installation, click Finish Page Page Page Page Appendix E. Firmware Upgrade Page Typical Errors Appendix F. Use a PC to Control an iOptron Mount
Related manuals
Manual 48 pages 10.2 Kb Manual 4 pages 51.1 Kb Manual 4 pages 11.84 Kb

8603 and 8604, 8602, 8600 specifications

The iOptron 8604, 8602, 8603, and 8600 series are innovative telescopes designed to enhance the stargazing and astrophotography experience for both amateur astronomers and seasoned enthusiasts. Each model in this series boasts distinct features and advanced technologies, making them suitable for a variety of applications in the field of astronomy.

The iOptron 8604 sets itself apart with its robust GoTo mount capability, allowing users to easily locate and track celestial objects with precision. This model incorporates a high-performance altitude-azimuth design, which provides smooth motion and enhanced stability. The telescope is equipped with a user-friendly hand controller that includes a database of thousands of celestial objects, making observation straightforward and enjoyable. Additionally, the 8604 offers a maximum payload capacity, allowing users to attach various accessories for a full astrophotography setup.

The iOptron 8602 also includes the GoTo mount feature, but its design focuses on portability. Weighing less than its counterparts, the 8602 is an ideal choice for those who want to explore the night sky from different locations without the hassle of heavy equipment. Despite its lightweight construction, the 8602 does not compromise on stability, ensuring that users can enjoy clear and detailed views of their astronomical targets.

The iOptron 8603 introduces advanced tracking features that facilitate long-exposure astrophotography. With built-in autoguiding ports and customizable tracking options, the 8603 is tailored for hobbyists who want to capture breathtaking images of distant galaxies and nebulae. Its sturdy mount allows for high precision and minimal vibrations during exposure, critical for obtaining sharp images.

Lastly, the iOptron 8600 series model excels in its versatility. Users will appreciate its ability to function as both a visual and astrophotography telescope. The 8600 is engineered with exceptional optics that provide clear and luminous views, while its advanced electronic features enhance the user experience. With easy setup and intuitive controls, the 8600 allows astronomers of all skill levels to navigate the night sky with confidence.

In summary, iOptron's 8600 series telescopes combine innovative technology, user-friendly features, and robust designs, making them exceptional choices for anyone looking to explore the wonders of the universe. Whether seeking to observe planets, star clusters, or engage in astrophotography, the iOptron 8604, 8602, 8603, and 8600 models cater to a wide range of astronomical interests.
Top Page Image Contents