Carson Optical RP-300 instruction manual Table of Contents

Page 2

 

 

Congratulations on your purchase of a Carson RP-300 Red PlanetTM Series

Table of Contents:

telescope. This telescope features an easy-to-use design and high perfor-

mance optics that are perfect for amateur astronomers looking to explore

 

Introduction

the wonders of outer space. Please read this manual carefully to ensure that

 

you assemble and use your telescope correctly. When used properly, your

3

Box Contents

Red PlanetTM telescope should provide years of exciting observations of the

universe. Please note that this Newtonian Reflector telescope was designed

4-9

Figures 1-9/Figure Key

for astronomical viewing and is not recommended for terrestrial use.

10-11

Telescope Assembly

IMPORTANT: DO NOT USE YOUR RED PLANETTM TELESCOPE

 

• Setting up Your Tripod

 

• Attaching the Equatorial Mount

TO LOOK AT OR NEAR THE SUN! DOING SO WILL CAUSE IN-

 

• Attaching the Counterweight

STANT AND PERMANENT EYE DAMAGE.

 

• Attaching the Slow Motion Cables

Each box contains the following:

 

• Attaching the Telescope Tube to the Mount

 

• Attaching the Finder Scope

• Complete Optical Tube Assembly.

12-13

• Attaching the Eyepieces

• Equatorial Mount.

Balancing the Telescope

Heavy-Duty Aluminum Tripod.

 

• Balancing the Mount in R.A.

• 9mm Kellner Eyepiece (1.25”O.D.).

 

• Balancing the Mount in Dec.

• 20mm Kellner Eyepiece (1.25”O.D.).

13

• Aligning the Finder Scope

• Cradle Rings with Lock Knobs.

Calculating Power

• 6x30mm Finder Scope.

14

Understanding Celestial Movement

• Counterweight Bar with Counterweight.

14-15

A Brief Overview of Celestial Coordinates

• Flexible Cable Controls for Both Axes.

15

Polar Alignment

Please unpack your telescope carefully and make sure that all accessories are

16-17

Using the Telescope

 

• Image Orientation

included in the box.

18-22

• Using Setting Circles

 

Care and Maintenance of Your Telescope

 

 

• Cleaning

 

 

• Collimation of Optics

 

 

• Adjusting the Diagonal Holder

 

 

• Adjusting the Primary Mirror

 

21

• Night Time Star Collimation Testing

 

Specifications

 

21

Warnings

 

22

Customer Service

 

22-23

Warranty Information

 

3

Image 2
Contents RP-300 Telescope Table of Contents Page Page Key to Figures Assembly of your Red Planet Telescope Balancing the Mount in R.A Calculating PowerBalancing the Telescope Balancing the Mount in DecPolar Alignment Understanding Celestial MovementBrief Overview of Celestial Coordinates Image Orientation Using the TelescopeUsing Setting Circles Adjusting the Diagonal Holder Care and Maintenance of Your TelescopeCleaning Collimation of the OpticsNight Time Star Collimation Testing SpecificationsAdjusting the Primary Mirror Warranty Procedure Customer ServiceWarranty Information