Firstscope 60 Refractor, Setting Up The Tripod

THE FIRSTSCOPE 60 REFRACTOR

The Firstscope AZ is a classical, two element refracting telescope that comes on an altazimuth mount. This section instructs you on the proper assembly and use of your Firstscope telescope, which is shipped in one box, containing all the parts you need to assemble it. Unpack and lay out all of the parts in a large, clear area where you’ll have room to work. Keeping track of the parts, use the list below and the telescope diagram to confirm you have, and can identify each part.

•Three tripod legs, with one accessory tray bracket mounted on each leg. (Firstscope 70 AZ comes with a collapsible center leg brace).

•Tripod accessory tray

•Altazimuth mount

•Telescope Optical Tube

•Lens shade; front and rear lens caps (pre-assembled)

•Rack and pinion focuser (pre-assembled)

•Altitude slow motion rod assembly (Firstscope 60 model)

•Star Pointer Finderscope with bracket.

•One 1¼" 90° diagonal

•20mm 1¼" eyepieces

•10mm 1¼ " eyepiece

•1.5x Erecting eyepiece

Setting Up The Tripod

To set up the tripod, locate the altazimuth mount, the tripod legs and the tripod bolt pack.

1. Extend the center portion of each of the three tripod legs down 6-8".

2. Open the tripod adjustment bolt pack. Use the three wing nut screws to secure each of the extended legs by threading these screws through the holes in the brackets at the bottom of each leg. This is important. If you do not extend the legs now, you won’t be able to once the tripod head is assembled. Fine tuning of tripod height can be done later, and the wing nuts can be adjusted to secure the telescope at a desirable height.

3. Orient the three tripod legs so the brackets that hold the accessory tray are on the inside.

4. Slide the two top portions of the tripod leg around the flange on the altazimuth mount, so the flange is secured between them.

5. Remove the wing nut and one washer from the screw.

6. Slide the screw through the tripod leg and flange, until the screw extends out the other side.

7. Slide the washer and wing nut over the screw and tighten. This can be left slightly loose, to allow for positioning the legs later, when attaching the accessory tray.

8. Repeat this process for the remaining two legs. Now the tripod will stand by itself.

Attaching the Accessory Tray

Start by locating the accessory tray and bolt pack for the accessory tray.

1. Remove the wing nut and one washer from each screw.

2. Slide one corner of the accessory tray over the bracket hanging from the tripod leg. Note: remove plastic tips from each bracket. Plastic tips serve only to protect the tripod leg from being scratched. Make sure the tray is placed over the tip of the bracket, so the bracket doesn’t cover the holes cut into the accessory tray, allowing for full use. For the Firstscope 70 AZ, the accessory tray sits on top of the center leg brace and attaches with the provided winged bolts.

3. Insert a screw—with washer—down through the accessory tray and bracket.

4. Slide the washer and wing nut over the end of the screw. Tighten the screw completely.

5. Repeat this process for the remaining two corners of the accessory tray.

21052, Refractor, 70 AZ, 60 AZ, 21071 specifications

The Celestron 21052 and 21071 are standout models in the brand's renowned refractor telescope range, ideal for both novice astronomers and seasoned stargazers. The 70 AZ and 60 AZ options provide exceptional portability while still delivering impressive optical performance.

The Celestron 21052, featuring a 70mm aperture, is designed to capture bright and clear images of celestial objects. Its refractor design utilizes high-quality glass optics that reduce chromatic aberration, ensuring that colors are rendered accurately and clearly. With a focal length of 700mm, it offers a suitable balance of magnification and field of view, making it perfect for observing planets, star clusters, and even some of the brighter deep-sky objects.

The portable design of the 70 AZ model makes it easy to transport to various viewing locations. It comes with a sturdy, adjustable tripod that provides excellent stability during observations. Additionally, a smooth altazimuth mount allows for easyTracking of celestial objects as they move across the night sky. The telescope also includes a finder scope, which aids in locating objects quickly, enhancing the overall viewing experience.

The Celestron 21071, featuring a slightly smaller 60mm aperture, is a fantastic choice for beginners looking to get into astronomy without a hefty investment. Despite its compact size, the 60 AZ still offers great optical quality, making it possible to view the Moon's craters, Jupiter’s moons, and more with remarkable clarity. The 60 AZ is designed for quick setup and portability, making it ideal for impromptu stargazing sessions.

Both models come with a variety of accessories that enhance usability, including multiple eyepieces for different magnification levels and a star map to help users locate celestial objects. The telescopes are also compatible with a smartphone adapter, allowing users to capture images of their observations and share them with friends or social media.

Ultimately, the Celestron 21052 and 21071 refractor telescopes exemplify quality design and ease of use, making them excellent choices for anyone interested in exploring the night sky. With their user-friendly features and excellent optics, these telescopes provide a window to the wonders of the universe, encouraging a lifelong passion for astronomy.