Graco 1512, 1522 manual For Safe Battery USE, Trouble Shooting the Battery Powered Swing

Page 6

Step 6.

Adjust the control switch to medium setting.

•For a lower speed, push the

control switch toward “low.”

•For a higher speed, push the

control switch toward “high.”

Step 7.

Give the seat a push to start the swing.

Observe the swinging motion for a minute. It takes time for your swing to adjust to a new setting.

A small, quiet baby will swing higher on each setting than a larger, more active baby.

Indicator Light- ON/OFF light comes on when swing is turned on.

Seat may be stopped any time motor is running without damaging motor. Push swing to start.

If your swing motor stops operating by itself, protective device may have been activated. Turn off motor, wait three minutes, then restart swing

FOR SAFE BATTERY USE:

Do not remove or insert the batteries with baby in swing. The batteries could fall on baby if dropped.

Keep the batteries out of children’s reach.

Any battery may leak battery acid if mixed with a different battery type, if inserted incorrectly (put in backwards) or if all batteries are not replaced or recharged at the same time.

Any battery may leak battery acid or explode if disposed of in fire or an attempt is made to charge a battery not intended to be recharged. Never recharge a battery of one type in a recharger made for a battery of another type.

Discard leaky batteries immediately. Leaky batteries can cause skin burns or other per- sonal injury. When discarding batteries, be sure to dispose of them in the proper manner, according to your state and local regulations.

Always remove batteries if the swing is not going to be used for a month or more. Batteries left in the unit may leak and cause damage.

Recommended Type Batteries–Size D

!Rechargeables–Use and recharge according to

!manufacturer’s instructions.

!Disposables–Alkaline.

!NEVER mix battery types.

Change batteries when swing ceases to operate satisfactorily.

Trouble Shooting the Battery Powered Swing

Problem:

Possible Reasons for Problem:

Swing

1.

No batteries in swing.

won't

2.

Batteries dead.

operate

3.

Speed setting too low.

 

 

4.

Batteries in backwards—check “+” and “-”.

 

5.

Corrosion on battery terminals. Rotate batteries in

 

 

place against terminals, or clean with sandpaper

 

 

or steel wool if corrosion is severe.

 

6.

Baby leaning too far forward.

 

7.

Baby grabbing swing legs. (Discontinue use.)

 

8.

Seat not pushed high enough for a good start.

 

9.

Protective device activated. (Turn off motor, wait

 

 

3 minutes, then restart swing.)

Seat

1.

Control setting too low.

doesn't

2. Blanket hanging down, causing increased wind

swing

 

resistance.

very

3.

Batteries too weak.

high

4.

Baby leaning too far forward.

 

 

5.

Baby too heavy or too active. (Discontinue use.)

 

6.

Soft carpet (swings higher on hard floors).

If you still have problems, call our toll-free number, 1-800-345-4109.

11

 

12

 

 

Image 6
Contents Models 1512 Using the CarrierUsing the Crad Customer SatisfactionMaintenance Parts ListOther Important Safety Information RadleAttaching the Legs Installing BatteriesUsing the Cradle Attaching the HangerOn certain models, attach the outer cradle cover Using Infant CarrierAdjusting the Handle Your cradle will swing prop- erly only in the lower rangeAttaching the Seat Cover Using the Swing Using the TrayAdjusting the Stand For Safe Battery USE Trouble Shooting the Battery Powered SwingInstructions for ordering swing parts Replacement PartsParts List Price Model Number Ship to

1522, 1512 specifications

Graco 1522 and 1512 are both exceptional models from Graco's renowned line of airless paint sprayers. Designed for both professionals and DIY enthusiasts, these models are ideal for a variety of painting applications, offering ease of use, reliability, and high performance.

The Graco 1522 is known for its powerful motor and high delivery rate. It can handle a variety of coatings, from stains to thick latex paints, making it a versatile choice for any project. The adjustable pressure control allows users to fine-tune the spray pattern to achieve the desired finish, ensuring a smooth and even application every time. Its lightweight design enhances portability, making it easy to transport to different job sites.

On the other hand, the Graco 1512 features a slightly smaller motor but still provides impressive performance for smaller projects or DIY tasks. It offers the same adjustable pressure control as the 1522, allowing users to customize their application. The 1512 is designed with an easy-to-use tip selection feature, enabling users to quickly switch between different nozzle sizes for various tasks. This adaptability ensures that whether you are painting walls, fences, or furniture, you have the right tool for the job.

Both models are equipped with Graco’s proven ProConnect system, which allows for fast and easy pump replacement without the need for tools. This means less downtime and greater efficiency when faced with a problem. Another notable technology featured in both models is the RAC tip system, which reduces overspray and improves the control of the spray pattern, resulting in a professional finish.

In terms of durability, Graco has designed the 1522 and 1512 with robust components that can withstand the rigors of frequent use. They also come with built-in filters that help prevent clogs and keep the paint flow smooth. The easy-to-clean design of both sprayers simplifies maintenance, ensuring longevity for both devices.

In conclusion, Graco 1522 and 1512 offer advanced features, adaptable technologies, and reliable performance. Whether you are a seasoned professional or a beginner, these sprayers provide an excellent solution for a range of painting tasks, ensuring quality results each time. With their user-friendly designs and innovative systems, Graco continues to be a leader in the paint spraying industry.