Caring for Your Battery Powered Swing

Step 4.

Adjust the control switch to medium setting.

Step 5.

PUSH SWING SEAT TO START. BE SURE YOU PUSH IT UP HIGH ENOUGH FOR THE MOTOR TO GET A GOOD START.

Observe the swinging motion for a minute. It takes time for your swing to adjust to a new setting.

•For a lower speed, push the control switch toward “low.”

•For a higher speed, push the control switch toward “high.”

A small, quiet baby will swing higher on each setting than a larger, more active baby.

Indicator Light- ON/OFF light comes on when swing is turned on.

Your seat may be stopped at any time the motor is running without damaging the motor. Push swing to restart.

If your swing motor stops operating by itself, a protective device may have been activated. Turn off motor, wait three minutes, then restart swing.

FOR SAFE BATTERY USE:

Do not remove or insert the batteries with baby in swing. The batteries could fall on baby if dropped.

Keep the batteries out of children’s reach.

Any battery may leak battery acid if mixed with a different battery type, if inserted incorrectly (put in backwards) or if all batteries are not replaced or recharged at the same time.

Any battery may leak battery acid or explode if disposed of in fire or an attempt is made to charge a battery not intended to be recharged. Never recharge a battery of one type in a recharger made for a battery of another type.

Discard leaky batteries immediately. Leaky batteries can cause skin burns or other per- sonal injury. When discarding batteries, be sure to dispose of them in the proper manner, according to your state and local regulations.

Always remove batteries if the swing is not going to be used for a month or more. Batteries left in the unit may leak and cause damage.

Recommended Type Batteries–Size D

!Rechargeables–Use and recharge according to

!manufacturer’s instructions.

!Disposables–Alkaline.

!NEVER mix battery types.

Change batteries when swing ceases to operate satisfactorily.

Problem:	Possible Reasons for Problem:
Swing	1.	No batteries in swing.
won't	2.	Batteries dead.
operate	2.	Batteries dead.
operate	3.	Speed setting too low.
	3.	Speed setting too low.
	4.	Batteries in backwards—check “+” and “-”.
	5.	Corrosion on battery terminals. Rotate batteries
		in place against terminals, or clean with
		sandpaper or steel wool if corrosion is severe.
	6.	Baby leaning too far forward.
	7.	Baby grabbing swing legs. (Discontinue use.)
	8.	Seat not pushed high enough for a good start.
	9.	Protective device activated. (Turn off motor,
		wait 3 minutes, then restart swing.)
Seat	1.	Control setting too low.
doesn't	2. Blanket hanging down, causing increased
swing		wind resistance.
very	3.	Batteries too weak.
high	3.	Batteries too weak.
high	4.	Baby leaning too far forward.
	4.	Baby leaning too far forward.
	5.	Baby too heavy or too active. (Discontinue use.)
	6.	Soft carpet (swings higher on hard floors).

If you still have problems, call our toll-free number, 1-800-345-4109.

11
11	12

1602 specifications

The Graco 1602 is a versatile and efficient airless paint sprayer designed for both professional contractors and DIY enthusiasts. Known for its robust construction and user-friendly features, this machine is an excellent choice for a variety of painting projects, from small DIY tasks to larger residential jobs.

One of the standout features of the Graco 1602 is its reliable airless pumping system, which delivers a consistent, high-pressure spray pattern for an immaculate finish. This technology allows for smooth application of paint, stains, and sealers on numerous surfaces, including walls, fences, and decks. The adjustable pressure control enables users to tailor the spray pressure to suit the specific material being applied, ensuring optimal results without overspray or waste.

Another significant characteristic of the Graco 1602 is its lightweight and portable design, making it easy to transport between job sites. Weighing in at just over 20 pounds, it is ideal for users who need to move quickly without compromising efficiency. The integrated carrying handle adds to its practicality, allowing for secure handling during transport.

The sprayer is equipped with a powerful electric motor that ensures continuous operation while reducing the downtime often associated with conventional sprayers. This technology not only enhances performance but also minimizes the risk of clogs, providing a more reliable spraying experience. The Graco 1602 also features a built-in filter, which helps keep the paint free from debris and ensures a clean spray every time.

For ease of maintenance, the Graco 1602 comes with a simple pump design that allows for quick and straightforward disassembly, making it easier for users to perform regular cleaning and maintenance checks. Additionally, the model includes a wide array of compatible nozzle sizes, allowing users to customize the spray width and pattern for different applications, from fine finishes to thicker coatings.

In addition to its performance capabilities, safety is a priority with the Graco 1602. It includes built-in safety features such as a trigger lock and a power switch that help prevent accidental activation, making it suitable for users of all experience levels.

In summary, the Graco 1602 is a high-performing airless paint sprayer that combines advanced technology, portability, and user-friendly features. Whether tackling interior painting projects or outdoor jobs, this sprayer offers the versatility and reliability needed to achieve professional-quality results.