Operation of the Machine

-Never operate the hedge trimmer with a loose grip.

-Never touch the cutting blades when starting the engine and during operation.

-Operate the hedge trimmer in such a manner as to avoid inhalation of the exhaust gases. Never run the engine in enclosed rooms (Risk of gas poisoning). Carbon monoxide is an odorless gas.

-All protective equipment such as a guard supplied with the machine must be used during operation.

-Never operate the engine if the muffler is faulty or missing.

-Use the hedge trimmer only in good light and visibility.

-During the winter season beware of slippery or wet areas, ice and snow. (Risk of slipping.) Always ensure a safe footing.

-Never stand on a ladder and run the hedge trimmer. Keep both feet on the ground.

-Never climb up the trees with the hedge trimmer to perform cutting operation.

-Never work on unstable surfaces.

-Remove sand, stone, nails, wire, etc. found within the working area. Foreign objects may damage the cutting blades.

-Prior to the cutting operation, cut away 8 mm or thicker branches with pruning shears.

-Before commencing cutting, the cutting blades must have reached full working speed.

-Always hold the hedge trimmer firmly with both hands on the handles.

-Use a firm grip with thumbs and fingers encircling the handles.

-When you release the throttle, it takes a few moments before the cutting blades stop.

-Do not operate the hedge trimmer with high idle speed. You cannot adjust the cutting speed with the throttle control if the idle speed is too high.

-During the cutting operation, hold the hedge trimmer so that the blades form a

15-30° angle with the cutting line.

-Pay special attention when cutting hedges close to or against wire fences.

-Do not touch hard objects such as wire fence, stone or ground with the cutter blades. It may cause blades to crack, chip or break.

-Should the cutting blades hit stones or other hard objects, immediately switch off the engine and inspect the cutting blades for damage. Replace damaged blades before re-commencing work.

-Take a rest periodically. Makita recommends to take a 10- to 20-minute rest every 50 minutes of use.

-Switch off the engine immediately in case of any engine problems.

-Operate the hedge trimmer with as little noise and contamination as possible. In particular check the correct setting of the carburetor and the fuel/oil ratio.

-Never attempt to remove jammed cut material when blades are running. Put unit down, turn it off, and remove necessary cuttings.

ADJUSTING REAR HANDLE ANGLE

The rear handle can be turned down to 90° to the left or right side and set at every

45°.

To change the angle:

1.Press the release lever to release the lock.

2.Turn the handle to an angle of 0°, 45° or 90°.

3.Make sure that the release lever returns to the original position to engage the lock.

Do not pull the throttle lever while the lock is released.

Do not release the lock during operation.

EH6000W, EH7500W, EH5000W specifications

The Makita EH5000W, EH7500W, and EH6000W are part of Makita's premium range of outdoor power equipment, specifically designed for professional-grade performance in the world of landscaping and gardening. Each model brings unique features and technology that suit various user needs while adhering to the brand's commitment to quality and reliability.

The EH5000W is powered by a robust 50.4cc 2-stroke engine, delivering an impressive output that allows for exceptional cutting performance. This model is particularly suited for heavy-duty tasks, characterized by a lightweight design that ensures ease of handling during prolonged use. The EH5000W features a finely tuned cutting mechanism with precision blades that provide clean cuts and reduce the likelihood of damaging plants while maintaining a healthy garden.

On the other hand, the EH7500W boasts a more powerful 75.6cc engine, making it ideal for professional landscapers who require a higher cutting capacity and efficiency. This model is designed with enhanced durability and extended runtime capabilities, ensuring that users can complete larger projects without frequent interruptions. The EH7500W incorporates advanced vibration dampening technology, which minimizes user fatigue during operation, allowing for comfortable prolonged usage. Its cutting performance is further enhanced by its adjustable blade angle, enabling users to tackle various types of hedges and shrubs with ease.

The EH6000W offers a mid-range solution with a 60cc engine, striking a balance between power and efficiency. It is particularly noted for its versatility, allowing it to handle a wide range of cutting tasks efficiently. This model features an ergonomic design with an adjustable handle that provides better control and comfort during operation. The EH6000W also integrates a sophisticated air filtration system that keeps the engine clean and running smoothly, thereby prolonging its lifespan.

All three models benefit from Makita's commitment to innovation and quality. They are designed with specialized cutting technology that enables them to deliver precise results, ensuring that users achieve the desired finish without compromising on efficiency. Additionally, they feature fuel-efficient engines that reduce operational costs while adhering to strict environmental standards.

In conclusion, the Makita EH5000W, EH7500W, and EH6000W represent a line of powerful, reliable, and efficient outdoor power tools, designed to meet the demands of both professional landscapers and dedicated DIY enthusiasts. Each model's unique combination of features, technologies, and characteristics provides users with exceptional performance, making them a valuable asset in any gardening or landscaping project.