Motion FWS-001 Federal Communications Commission notice USA, Unintentional Emitter per FCC Part

Page 5

Note: To determine which regulatory and safety marks apply to a specific product, component, or accessory, check the product label affixed to the product and/or its components.

Federal Communications Commission notice (USA)

Electromagnetic Interference (EMI) is any electromagnetic disturbance that interrupts, obstructs, or otherwise degrades or limits the effective performance of electronics or electrical equipment. These emissions can potentially disrupt, degrade, or otherwise interfere with authorized electronic emissions, which may include television, AM/FM broadcasts, cellular services, radar, air-traffic control, and pagers.

The FCC Rules and Regulations have established Radio Frequency (RF) emission limits to provide an interference- free RF spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules.

Unintentional Emitter per FCC Part 15

The rating label on Motion Tablet PCs, docking stations and all accessories show which class (A or B) these devices fall into. Once you determine the class of the device, refer to the following corresponding statement and to the FCC notices in this Safety and Regulatory Guide.

Class A is a digital device that is marketed for use in a commercial, industrial or business environment, exclusive of a device which is marketed for use by the general public or is intended to be used in the home.

Class B is a digital device that is marketed for use in a residential environment notwithstanding use in commercial, business and industrial environments. Examples of such devices included, but are not limited to, personal computers, calculators, and similar electronics devices that are marketed for use by the general public.

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

Class A Equipment: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

The following information is provided on the device or devices covered in this document in compliance with FCC regulations:

Motion Tablet PC model number: FWS-001

Company name: Motion Computing, Incorporated 8601 Ranch Road 2222, Bldg 2

Austin, TX 78730 USA Telephone: 512-637-1100 Fax: 512-637-1199

Manufacturer name: Compal Information (Kunshan) Company; LTD

3rd Street, Kunshan Export Processing Zone Kunshan, Jiangsu 215300, China Telephone: (86-0512) 57355000

Fax: (86-0512) 57355200

Intentional Emitter per FCC Part 15

Embedded in your Tablet PC are various Radio Frequency (RF) wireless communication devices. It may contain one or more Radio type devices such as the display digitizer that operates in the 450–600 KHz band, a Wi-Fi device that operates in the 2.4 or 5.4 GHz band, a Bluetooth device that operates in the 2.4 GHz band, and an optional 3G mobile broadband (WWAN) device that operates in the bands of 824.7- 848.31 MHz as well as 1851.25-1908.75 MHz dependent upon the 3G network support in accordance to the operators locale. All radio-type devices embedded in your Tablet PC have met all the qualifications for use under FCC regulations and guidelines.

This equipment complies with FCC Radio Frequency Electromagnetic Signal (RF) exposure limits set forth for an uncontrolled environment of portable transmission. This product has been evaluated for RF exposure at a distance of 20 cm (8 inches). Operation at a separation distance less than 20 cm (8 inches) from the radiating element to nearby persons will not expose nearby persons to RF levels that exceed the FCC rules for RF exposure.

Internal Bluetooth module notice

Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio communications. However, there is no guarantee that

5

Image 5
Contents CL900 Tablet PC Product safety information Symbol descriptionMounting and installation disclaimer Setup precautionsTablet PC precautions Basic personal safety precautionsCabling and power cord precautions High risk and dangerous activity warningTravel precautions Battery pack disposalComponent replacement precautions Sound pressure/volume noticeFederal Communications Commission notice USA Internal Bluetooth module noticeUnintentional Emitter per FCC Part Intentional Emitter per FCC PartIC notice Canada only Airline travel noticeUnintentional Emitter Conformité Européne CE European UnionIntentional Emitter per RSS Intentional Emitter Radio Frequency exposure statementWideband Transmission System radio Australia/New Zealand C-Tick statements Wireless noticesAustralia/New Zealand A-Tick statement NOM/NYCE statementIanatel statement Internal Bluetooth noticeInternal Bluetooth Class B notice Trademarks Battery noticeLimited Warranty Warranty exclusions Repair or replacementWarranty transfer to another country Software and data
Related manuals
Manual 81 pages 46.57 Kb