M-Systems Flash Disk Pioneers IDE 4000, Flash Disk Unpacking the Drive, Handling Instructions

Page 18

7.USING THE IDE 4000 FLASH DISK

The IDE 4000 is shipped with the following components:

•Warranty certificate indicating M-Systems’ 36-month warranty

•Four screws and one jumper, in kit no. 48-PK-001-00

If any of these items is missing, please contact your dealer.

7.1. Unpacking the Drive

Before unpacking or handling a drive, take all proper electrostatic discharge (ESD) precautions, including personnel and equipment grounding.

Before you begin installing the IDE 4000 in your system, perform a visual inspection and follow the recommendations below:

•If the shipping container appears to be damaged or water-stained, notify your dealer.

•Remove the disk from its shipping enclosure and inspect it for any damage that may have occurred during shipment. If any damage is observed, notify your dealer.

•Record the disk serial number and shipment date.

•Retain the original shipping enclosure and all packing material for re-shipment.

7.2. Handling Instructions

You can prolong the life of your IDE 4000, increase its reliability, and prevent unnecessary damage by following the instructions listed below. Failure to follow any of these instructions may void your warranty.

•Always take all proper electrostatic discharge (ESD) precautions, including personnel and equipment grounding.

•Always operate the flash disk within the environmental specifications.

•Always use a grounded wrist strap when handling the flash disk.

•Never switch DC power to the drive by plugging an electrically live source cable into the drive’s power connector.

•Pay attention to the cable polarity whenever connecting the drive to the cable.

7.3. Installing the Drive in a PC

To install the IDE 4000:

1.Power off the PC and remove the cover.

2.Configure the IDE 4000 jumper settings according to the information provided in Section 2.

18

Product Specification and User Manual IDE 4000 Flash Disk

34-PS-0304-00 Rev. 2.1

Page 17 Page 19
Image 18
Page 17 Page 19
Contents IDE 4000 Flash Disk January 34-PS-0304-00 RevDocument Control Information Revision HistoryTable of Contents Warranty Ordering Information How to Contact Us Characteristics SpecificationsCritical Item Definition Input Voltage Access TimeSeek Time Current ConsumptionIDE 4000 Flash Disk Capacities CHS Settings for Low-Capacity IDEMemory Capacity Capacity MB Cylinder Heads Sectors V1.08 V1.09Physical Characteristics EnduranceMean Time Between Failures Mtbf General tolerance is ±0.25 mm ±0.01 Pin Number Signal Name J1 Pin AssignmentJ2 Pin Assignment Temperature Environmental ConditionsShock AltitudeRelative Humidity VibrationDrive Configuration IDE 4000 Disk Address Setting by JumperInterface Connectors IDE CableSupported IDE Commands IDE CommandsCommand Name Command Code CE and FCC Compatibility Label Information Outside LabelUnpacking the Drive Installing the Drive in a PCUsing the IDE 4000 Flash Disk Handling InstructionsUsing the IDE 4000 in an MS-DOS-Based Platform TroubleshootingHow to Get Help Warranty Ordering Information CcccJapan Europe HOW to Contact USChina Taiwan Internet

Flash Disk, IDE 4000 specifications

M-Systems Flash Disk Pioneers IDE 4000 marked a substantial leap in the field of data storage technology during its introduction. This innovative device combined high-performance capabilities with the timely necessity for portable data solutions, particularly in an era when hard disk drives had limitations in terms of speed, durability, and size.

At the core of the M-Systems Flash Disk Pioneers IDE 4000 is its use of NAND flash memory technology. This allowed for no-moving-parts storage, which improved durability in mobile and portable applications. Unlike traditional hard drives susceptible to mechanical wear and tear, the flash disk is more robust, making it ideal for applications requiring reliability. The NAND flash architecture also contributes to lower power consumption, offering energy-efficient operations that prolong battery life in portable devices.

The IDE 4000 was designed with interface compatibility in mind. It utilized the Integrated Drive Electronics (IDE) standard, enabling seamless integration with existing systems, whether they were desktop computers or embedded systems. This interoperability made the device an appealing choice for a wide range of applications, from consumer electronics to industrial systems.

In terms of data access speed, the M-Systems Flash Disk Pioneers IDE 4000 offered improved read and write speeds compared to traditional hard drives, significantly optimizing system performance. The quick response time was particularly beneficial for tasks requiring rapid data retrieval, such as in multimedia applications and real-time data processing environments.

Another notable feature of the IDE 4000 was its scalability. Available in varying capacities, it enabled users to select a model that suited their specific storage needs. The flexibility in capacity allowed for diverse applications spanning from simple data storage to complex applications requiring substantial amounts of data handling.

Robust data integrity mechanisms were also included in the design, ensuring that users’ data remained safe and protected from corruption. This included features like error correction codes (ECC), which enhanced reliability by detecting and correcting errors in real time.

In conclusion, the M-Systems Flash Disk Pioneers IDE 4000 played an instrumental role in the evolution of data storage solutions. Its innovative use of NAND flash technology, compatibility with IDE standards, improved speed, scalability, and advanced data protection mechanisms set it apart as a pioneering force in the transition towards solid-state storage solutions, paving the way for future advancements in the sector.
Top Page Image Contents