M-Systems Flash Disk Pioneers Flash Disk, IDE 4000 Environmental Conditions, Temperature

Page 11

Figure 4: IDE 4000 Pin Configuration

1.3. Environmental Conditions

The IDE 4000 meets the performance requirements specified below, after exposure to non-operating environmental conditions, or during and after exposure to operating environmental conditions.

1.3.1.Temperature

1.3.1.1 Operating

The IDE 4000 operates without degradation at a pressure of 1 atm over the following ambient temperature range:

•Commercial temperature version: 0°C to +70°C : for IDE 4000 2.5” and 1.8”

•Extended temperature version: -40°C to +85°C :for IDE 4000 2.5”

The maximum temperature change rate shall not exceed 5°C per minute.

1.3.1.2 Non-Operating

The IDE 4000 commercial temperature version meets the performance requirements specified in this document after having been tested via exposure to a nominal ambient temperature of -55°C for not less than 3 days, and +95°C for a period of not less than 6 hours.

The maximum temperature change rate shall not exceed 5°C per minute.

11

Product Specification and User Manual IDE 4000 Flash Disk

34-PS-0304-00 Rev. 2.1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents January 34-PS-0304-00 Rev IDE 4000 Flash DiskRevision History Document Control InformationTable of Contents Warranty Ordering Information How to Contact Us Critical Item Definition CharacteristicsSpecifications Current Consumption Access TimeSeek Time Input VoltageCapacity MB Cylinder Heads Sectors V1.08 V1.09 CHS Settings for Low-Capacity IDEMemory Capacity IDE 4000 Flash Disk CapacitiesMean Time Between Failures Mtbf Physical CharacteristicsEndurance General tolerance is ±0.25 mm ±0.01 J2 Pin Assignment Pin Number Signal NameJ1 Pin Assignment Environmental Conditions TemperatureVibration AltitudeRelative Humidity ShockIDE 4000 Disk Address Setting by Jumper Drive ConfigurationIDE Cable Interface ConnectorsCommand Name Command Code Supported IDE CommandsIDE Commands CE and FCC Compatibility Outside Label Label InformationHandling Instructions Installing the Drive in a PCUsing the IDE 4000 Flash Disk Unpacking the DriveTroubleshooting Using the IDE 4000 in an MS-DOS-Based PlatformHow to Get Help Warranty Cccc Ordering InformationTaiwan Internet HOW to Contact USChina Japan Europe

Flash Disk, IDE 4000 specifications

M-Systems Flash Disk Pioneers IDE 4000 marked a substantial leap in the field of data storage technology during its introduction. This innovative device combined high-performance capabilities with the timely necessity for portable data solutions, particularly in an era when hard disk drives had limitations in terms of speed, durability, and size.

At the core of the M-Systems Flash Disk Pioneers IDE 4000 is its use of NAND flash memory technology. This allowed for no-moving-parts storage, which improved durability in mobile and portable applications. Unlike traditional hard drives susceptible to mechanical wear and tear, the flash disk is more robust, making it ideal for applications requiring reliability. The NAND flash architecture also contributes to lower power consumption, offering energy-efficient operations that prolong battery life in portable devices.

The IDE 4000 was designed with interface compatibility in mind. It utilized the Integrated Drive Electronics (IDE) standard, enabling seamless integration with existing systems, whether they were desktop computers or embedded systems. This interoperability made the device an appealing choice for a wide range of applications, from consumer electronics to industrial systems.

In terms of data access speed, the M-Systems Flash Disk Pioneers IDE 4000 offered improved read and write speeds compared to traditional hard drives, significantly optimizing system performance. The quick response time was particularly beneficial for tasks requiring rapid data retrieval, such as in multimedia applications and real-time data processing environments.

Another notable feature of the IDE 4000 was its scalability. Available in varying capacities, it enabled users to select a model that suited their specific storage needs. The flexibility in capacity allowed for diverse applications spanning from simple data storage to complex applications requiring substantial amounts of data handling.

Robust data integrity mechanisms were also included in the design, ensuring that users’ data remained safe and protected from corruption. This included features like error correction codes (ECC), which enhanced reliability by detecting and correcting errors in real time.

In conclusion, the M-Systems Flash Disk Pioneers IDE 4000 played an instrumental role in the evolution of data storage solutions. Its innovative use of NAND flash technology, compatibility with IDE standards, improved speed, scalability, and advanced data protection mechanisms set it apart as a pioneering force in the transition towards solid-state storage solutions, paving the way for future advancements in the sector.
Top Page Image Contents