English
GENERAL SAFETY RULES
CAUTION! Read and understand these instructions. When using garden tools observe them to protect against electric shock, risk of fire and serious injury.
Read these instructions before using the shredder and keep them in a safe place for future reference.
Keep work area tidy
Cluttered work areas increase the risk of accident and injury. Keep the work area that is to be used clear of clutter.
Consider the work environment
Keep work area well lit. Do not expose tools to rain. Do not use tools in damp or wet location. Do not use the tools in the presence of flammable liquids or gases.
Gaurd against electric shock
Avoid body direct contact with earth or ground surfaces.
Keep away from children
Children under 16 years of age should not operate the shredder. The operator shall be responsible for the safety of person in the operating zone of the shredder.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tools while tired or under the influence of drugs, alcohol or medication.
Store tools in a secure place
When not in use, tools should be stored in a dry, high or
Dress properly
Rubber gloves and
Do not wear loose clothing or jewelry. Contain long hair.
Do not operate the shredder without the hopper.
When starting up or switching on the motor, the feeding device and discharge chute shall be in the closed position.
Never reach into the shredder when it is running or plugging in.
Make sure the shredder is standing on a level and a firm base and will not topple over.
Do not overreach
Keep proper footing and balance at all times.
Before leaving the shredder, it shall be switched off.
The shredder should be assembled in accordance with the instruction manual before switching on.
Maintain tools with care.
Keep the blades sharp and the exit shoot clean for better and safer performacnce. Follow instructions for changing accessories. Do not use the shredder if it is damaged in anyway.
Inspect power leads and cords
Inspect the plug and cord each time when the shredder is used. If damaged, have it repaired at an authorized service centre. Inspect extension cables regularly for signs of damage or aging. Replace if damaged. The shredder should not be used if the condition of the connection cord is not satisfactory.
Check damaged parts
Before further use of the tool, any part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, breakages of parts, mounting and any part that is damaged should be properly repaired or replaced at an authorized service centre unless otherwise indicated in the instruction manual. Have defective switches replaced at an authorized service centre. Do not use the tool if the switch does not turn it on and off.
Stay alert
Watch what you are doing. Use common sense. Do not operate the shredder when tired.
Warning!
The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury.
Have the shredder repaired by a qualified service centre. This shredder is constructed inaccordance with the relevant safety requirements.
Repairs should only be carried out by qualified service centre using original spare parts, otherwise this may result in considerable danger to the user.
- 3 -