English
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTRE for repair. When servicing, use only identical replacement parts.
WARNING:
Observe all normal safety precautions related to avoiding electrical shock.
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. Save this operator’s manual and review frequently for continuing safe operation and instructing others who may use this product.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eye glasses or standard safety glasses with side shields. Always use eye protection.
SAVE THESE INSTRUCTIONS
TOOLS USE AND CARE
Use the right tool. Do not force small tools or attachments to do the job of a heavy duty tool. The correct tool will do better and safer at the rate for which it is designed.
Ensure the switch is changed to off position if the power is goes off suddenly during use. This may prevent you from injury cause by sudden power recovery.
Never carry a tool by the cord or pull it to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges.
In case of jamming during operation, please switch off immediately and disconnect the plug from the
Avoid unintentional starting. Do not carry a plug in tool with your finger on the switch. Ensure the switch is off when plugging in.
Disconnect tools, when not in use before servicing and changing accessories.
Maintain tools with care.
STAY ALERT Keep cutting tools sharp and clean for better and safer performance. Follow instructions for changing accessories. Inspect tool cord periodically and if damaged have it repaired by an authorized service certre. Inspect extension cords periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease.
STAY ALERT Have your tools repaired by a qualified service centre. This electric tool is inaccordance with the relevant safety rules. Repairs should only be carried out by qualified service centre using original spare parts, otherwise this may result inconsiderable danger to the user.
Warning! The use of any accessory or attachment other than those recommended in this instruction manual, may present a risk of personal injury.
PRECAUTIONS FOR USING SHREDDER
Machine should be operated on firm level surfaces only.
Before starting the machine, check that the cutting chamber is empty.
Motor should be kept clean of debris and other accumulations.
WARNING: If machine should become clogged; switch off the motor, disconnect the power lead, make sure all moving parts are completely stopped before cleaning clogged debris.
Keep all guards and deflections in good working condition.
Stand clear of discharge chute at all times.
Do not over reach and keep face and body back from the feed opening.
WARNING: Ensure the power cord is always in good condition. A cord with broken insulation is extremely dangerous and can result in fire, electric shock, or serious personal injury.
Never pull the machine by the power cord and keep cord away from water and sharp edges.
Disconnect the power cord when the machine is not in use.
WARNING: The operation of any tools can result in foreign objects being thrown into your eyes, which can result in severe eye damage before operating power tool, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend wide vision safety mask for use over eye glasses or standard safety glasses with side shields.
- 5 -