Rear Panel

Destiny Stereo Power Amplifier

Front Panel

Speaker Selector Switching

Standby

Power	Creek	Speakers	Inputs
Switch	Link	A

AC Mains Input	Speakers	Input
& Mains Fuse	B	Select Button

Input Connection & Switching

The push button switches on the left-hand side of the rear panel marked Input are used to select and listen to either of two inputs. The Destiny Stereo Power Amplifier has both un-balanced sockets via RCA sockets and balanced inputs via XLR sockets.

To select the desired input, press the button to toggle between the inputs, as indicated by LED’s above the sockets. For additional information and options for Destiny products, ask your dealer for full details or view Creek’s website www.creekaudio.com You may also write to technical@creekaudio.com

Pre/power Connections

The Destiny Stereo Power Amplifier input is available through RCA and/or XLR sockets on the rear panel. This is helpful if you wish to bi-amp the Destiny Integrated Amplifier. The default setting from the factory is for the RCA sockets to be selected.

The RCA inputs connect the source to the input of the Destiny Stereo Power Amplifier in passive mode. That is to say, there is no additional circuitry involved. However the XLR inputs are there to allow a balanced source to be connected to the power amplifier. This is achieved internally via a balanced to unbalanced converter, which is an active circuit. If required the XLR input can be used as a second un-balanced input if the connection is made to one or other sides of the XLR input (hot or cold).

To select the desired sockets press the input select button on the rear panel . An LED will light above the socket which is selected. NB: Switch the amplifier off before making any changes in order to avoid any pops, clicks or other unwanted noises.

Loudspeaker Connections

The loudspeakers should be connected to the terminals marked ‘A’ using a suitable pair of cables designed specifically for audio use. High grade touch proof terminals on the rear panel allow for 4mm plugs, bare wire or spade lugs to be connected. Tighten the terminal fully after fitting the speaker wire. Please consult your dealer for advice if you are unsure. It is very important to connect the loudspeakers to the loudspeaker terminals in the correct phase. Cables are normally polarised with a line or raised bump on the positive side. If one channel is not connected in the same polarity as the other, a severe loss of bass performance and a spreading of the stereo image will result.

Stereo Power Amplifier specifications

The Creek Audio Stereo Power Amplifier is a standout choice for audiophiles seeking superior sound quality and reliable performance. Renowned for its engineering prowess, this amplifier exemplifies Creek's commitment to creating high-fidelity audio products that elevate the listening experience.

One of the main features of the Creek Audio Stereo Power Amplifier is its exceptional power output. With a robust performance typically rated around 100 watts per channel into 8 ohms, this amplifier effortlessly drives a wide range of speakers, from bookshelf models to larger floor-standing designs. It provides ample headroom for dynamic sound reproduction, ensuring that audio playback remains clear and distortion-free even at high volumes.

The amplifier utilizes advanced Class AB technology, which combines the efficiency of Class B amplifiers with the linearity of Class A designs. This results in a powerful yet refined sound that is free from the fatigue often associated with lower-quality amplifiers. The Class AB design also plays a critical role in maintaining thermal stability, allowing the amplifier to operate efficiently without overheating.

Another notable characteristic is the high-quality components used throughout the amplifier. Creek has employed carefully selected resistors, capacitors, and transistors that contribute to the amplifier's overall sonic performance. These components work harmoniously to produce a natural and engaging soundstage, allowing listeners to experience music in its most authentic form.

The Creek Audio Stereo Power Amplifier also features a sleek, minimalist design which fits seamlessly into any audio setup. Its solid build quality not only enhances the aesthetic appeal but also ensures durability and longevity. Key connectivity options, including RCA and XLR inputs, provide flexibility for integration with various source components.

Additionally, the amplifier incorporates advanced protection circuits to safeguard against overheating and short circuits, promoting safe operation in the long run. This level of protection allows users to enjoy their music without worrying about potential damage to the equipment.

In conclusion, the Creek Audio Stereo Power Amplifier delivers a powerful, high-fidelity listening experience that appeals to discerning audiophiles. With its advanced technology, premium components, and robust performance, it stands out as a top choice for those looking to elevate their audio systems. Whether for casual listening or critical analysis, this amplifier promises to enrich any listening environment.