ViewSonic S50/X50 manual Replacing the lamp

Page 32

THE LAMP (continued)

Replacing the lamp

All projector lamps will wear out eventually. If used for long periods of time, the image could become darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps early. If the lamp indicator turns red, or a message prompts you to replace the lamp when you power up the projector, the lamp needs to be replaced. (See "Related Messages" ( 35 ) and "Regarding the Indicator Lamps" ( 36 ) for details.)

1

Turn off the projector, and unplug the

power cord. Allow the lamp bulb to cool

 

for at least 45 minutes, and prepare a

 

new lamp (sold separately:

 

78-6969-9599-8).

 

 

 

 

2

After making sure that the projector has

cooled adequately, slowly flip over the

projector, so that the bottom is facing up

5

Insert the new lamp, and tighten the 1

screw firmly to lock it in place

• Also steadily push the opposite side of the screwed side of the

lamp into the unit.

3 Unscrew the 2 screws, and remove the lamp door

6

Replace the lamp door, and tighten

the 2 screws firmly to lock it in

place

4

Unscrew the 1 screw, and slowly pull

out the lamp by the handle

• Be careful not to touch the inside of the lamp case.

7

Slowly turn the projector so that

the top is facing up

 

 

 

 

8

Turn on the projector power, and using

the menu, reset the lamp timer

• To reset the lamp timer, from the OPTION menu, select LAMP TIME.

ATTENTION • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.

•Do not use with lamp door removed.

•Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.

•When the lamp has been replaced after the message of "CHANGE THE LAMP ...THE POWER WILL TURN OFF AFTER 0 hr." is displayed, or the lamp indicator is red, complete the following

operation within 10 minutes of switching power ON.

NOTE • The lamp indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again. If the lamp indicator is still red, replace the lamp.

31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents S50/X50 Multimedia Projector Contents S50/X50 Multimedia Projector Operators GuideProjector Features Connect your devices to the projector Part Names ProjectorRemote Control Setting UP the Projector Adjusting the Projectors Elevator FootAdjust the left-right slope Projector by twisting the rear foot Adjuster screw by handAdjusting the Screen Size and Projection Distance Top view Side viewConnecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Operating the remote control Using the Remote ControlPutting batteries into the remote control unit Turning on the Power Selecting an Input Signal Use the zoom ring to adjustScreen size Use the focus ring to focus the pictureTurning OFF the Power Adjusting the Volume Press the Volume buttonPress Buttons to adjust Volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse Buttons to adjust Position Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonUsing the Magnify Feature Freezing the ScreenTemporarily Blanking the Screen Signal SearchingSelecting the Aspect Ratio Using the Menu Functions Select a menu using Buttons Then press Or Enter buttonSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelMain Menu Multifunctional SettingsMain Menu Picture 1 Menu Picture 2 MenuPICTURE1 Menu PICTURE2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPVolume Option MenuOption Menu Auto OFFAvailable Functions Remote Control Operation Operating the PC ScreenHigh Voltage High Temperature High Pressure LampReplacing the lamp Air Filter AIR FilterCaring for the air filter Replacing the air filter Caring for the cabinet and remote control transmitter Other CareCaring for the inside of the projector Caring for the lensRelated Messages Regarding the Indicator Lamps Power Lamp Temp DescriptionItems to be confirmed Phenomena That May Easily Be Mistaken for Machine DefectsPhenomenon Specification SpecificationsDimension Diagram Not Included with Basic Packet Part Number Accessories Part NumberHow to Order DN00571 S50/X50OGENG

S50/X50 specifications

The ViewSonic S50/X50 series represents a significant advancement in the projector market, enhancing the way users engage with visual content in both home and professional environments. These projectors are designed to deliver exceptional image quality and versatile performance, making them ideal for a variety of applications including business presentations, educational settings, and home theaters.

One of the standout features of the S50/X50 series is its impressive resolution options. The projectors support Full HD 1080p resolution, allowing users to enjoy crystal-clear images with rich detail. This level of clarity is further enhanced by a high contrast ratio, which delivers deep blacks and vibrant colors, ensuring that images pop with realism and depth. Whether it’s for watching movies or giving impactful presentations, the S50/X50 ensures a visually stunning experience.

In addition to image quality, the S50/X50 projectors come equipped with advanced LED technology. This not only contributes to longer lamp life—often exceeding 20,000 hours—but also ensures consistent brightness over time, reducing the need for frequent replacements. The LED light source is not only energy-efficient but also environmentally friendly, making it a sustainable choice for users looking to minimize their ecological footprint.

Connectivity is another crucial feature of the S50/X50 series. Each projector comes with a variety of input options including HDMI, USB, and VGA ports, allowing for seamless connectivity with laptops, gaming consoles, and other multimedia devices. The inclusion of wireless capabilities further enhances versatility, enabling users to stream content directly from smartphones or tablets.

The user interface is designed with convenience in mind, featuring intuitive controls and setup options that cater to both tech-savvy users and those less familiar with projector technology. The projectors also incorporate keystone correction and zoom capabilities, facilitating easy adjustments to ensure a perfect image alignment, no matter the setup.

Portability is a key characteristic of the S50/X50 series, with a compact design that allows for easy transportation between different locations. This is particularly beneficial for professionals who frequently present in various settings, as they can easily bring their projector along without hassle.

In summary, the ViewSonic S50/X50 projectors stand out for their combination of high-resolution image quality, advanced LED technology, versatile connectivity options, and user-friendly features. Whether for business, education, or entertainment, these projectors deliver an enhanced viewing experience that meets the diverse needs of modern users.
Top Page Image Contents