Eiki A-6 instruction manual Introduction, Front view, Rear view

Introduction

The A-6 Multi Media Port combines the following functions:

•Input plate

•Four input Audio-video switcher

•Two input RGBHV switcher

•RGBHV splitter

in a single-gang wallplate. The Eiki A-6 greatly simplifies installation and cabling and avoids the need in most cases for video/audio and RGBHV switchers.

Anyone who has ever had to manage AV facilities will appreciate these unique features of the MultiMedia Port:

•A fast-response “Signal Present” indicator LED for the laptop input helps a user to quickly set up a laptop so that it is outputting a signal.

•MultiMedia Ports can be installed in different parts of a room and “daisy- chained” to create an economical multi- point input solution with minimal wiring and no central switchers.

•A “Monitor” output allows a desktop PC to display its output on a projector and its own monitor at the same time.

Front view

V1in	PC
	A in 1

The diagrams on this page show the inputs and outputs that are available on the A-6 Multi Media Port. The rear connections use screw terminal plugs to simplify the installation of fixed wiring.

The Eiki A-6 is an ideal companion for the Eiki MCS-1 and connects directly to it with the supplied interface cable.

V2in

V4in

Vout RL1 RL2 +24v

A in 2L A in 2R

A in L

PC

A in R

A out L A out R

Cable Compensation

Long <--> Short

The A-6 may also be controlled by other systems. It includes video sensor outputs that may be read by external equipment. Or the A-6 may be used standalone and locked to any fixed input arrangement by a combination of connections on the interface cable.

Please note that the Cable Compensation provision marked on the rear of the unit is not implemented in current production.

Eiki A-6 manual

Control Projector

& power

Rear view

Page 3