Eiki instruction manual Programming an MCS-1 to control the A-6 Multi Media Port

Programming an MCS-1 to control the A-6 Multi Media Port

•In the Eiki Control System Editor, select MCS-1 as your device.

•In “Edit behaviour” mode, double-click the key you wish to program. A dialog like that shown will appear.

•You can choose the inputs of the A-6 you wish to select when the button is pressed by using the drop-down items in the Multimedia Port section, as shown.

•Eiki Control System Editor software version 2.7.15 or later has a “Relay Output” drop-down item that allows you to operate an external relay which can be used to control a motorised screen or lights, for example.

•Make sure that when you are programming keys that should not change the state on the A-6 Multi Media Port, the selections are left at the default of “No change”.

“AV 1 (rear)” will select A in 1 and V1 in inputs on the rear of the unit.

Audio and video inputs are switched simultaneously.

“RGB front” will select the VGA socket marked “Laptop” on the front of the unit.

Please note that any audio associated with an RGB input must be selected separately using the

A/V Selection drop-down. Audio for RGB Front would be selected with

“AV 3 (front)”

Eiki A-6 manual Page 6