Intel 210T Hub LEDs, Intel Express 210T, Stackable Hub, Status, Meaning, 10Base-T, 100Base-TX

210T Hub LEDs

The 210T hub LEDs indicate these conditions: hub speed, collisions in the hub or stack of hubs, and whether the hub is managed.

	Intel Express 210T
	Stackable Hub
	Change Hub Speed
	10Base-T	Collision	Power
	100Base-TX	Managed
		Status
LED	Status	Meaning

10Base-T	On	Hub is operating at 10Mbps.
100Base-TX	On	Hub is operating at 100Mbps.
Collision	Blinking	Collisions detected on hub (or stack).
		LED brightens as more collisions are
		detected. Continuous blinking indicates
		an overloaded network.
	Off	No collisions detected.
Managed	On	Hub is managed by the optional
		Management Module.
	Off	Hub is not managed.
Status	On	Hub is operating normally.
	Blinking	Hub has an internal hardware or software
		problem. See descriptions for the right
		port LED on page 6.
Managed and Status	Blinking	Hub failed to load its internal software
Power	On	Hub is receiving power.
	Off	Hub is not receiving power.

7