Intel EPS1U manual High Power Recommendation, W Load Ratings

Page 17

SSI

EPS1U Power Supply Design Guide, V1.1

STATUS

High Power Recommendation

Table 9: 350 W Load Ratings

Load Range 1

Voltage

Minimum Continuous

 

Maximum Continuous

Peak

+3.3 V

1.5 A

 

16 A

 

+5 V

1.0 A

 

12 A

 

+12 V1

1.5 A

 

16 A

See note 2

+12 V2

1.5 A

 

16 A

See note 2

-12 V

0 A

 

0.5 A

 

+5 VSB

0.1 A

 

2.0 A

 

 

Load Range 2

 

 

Voltage

Minimum Continuous

 

Maximum Continuous

Peak

+3.3 V

0.2 A

 

5.0 A

 

+5 V

0.2 A

 

5.0 A

 

+12 V1

0.2 A

 

8.0 A

 

+12 V2

0.2 A

 

2.0 A

5.0 A

-12 V

0 A

 

0.5 A

 

+5 VSB

0.1 A

 

2.0 A

 

1.Maximum continuous total DC output power should not exceed 350 W.

2.Peak load on the combined 12 V output shall not exceed 32 A.

3.Maximum load on the combined 12 V output shall not exceed 28 A.

4.Peak total DC output power should not exceed 400 W.

5.Peak power and current loading shall be supported for a minimum of 12 seconds.

6.4.1Standby Outputs

STATUS

Required

The 5 VSB output shall be present when an AC input greater than the power supply turn on voltage is applied.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SSI Disclaimer Contents Tables FiguresConceptual Overview PurposeDefinitions, Terms, and Acronyms listed alphabetically Definitions/Terms/AcronymsMechanical Overview High Power Card Edge Form FactorAlternate Enclosure Small Power Form FactorExterior Face Interior FaceThermal Requirements Temperature RequirementsAirflow Requirements AC Input Voltage Specification AC Inlet ConnectorAC Input Requirements Input Under VoltageAC Line Dropout EfficiencyAC Line Fuse AC InrushAC Line Fast Transient Specification AC Line Transient SpecificationAC Line Sag Transient Performance AC Line Surge Transient PerformanceEdge Finger Pinout DC Output SpecificationConnector Edge Finger Layout Remote Sense Output Power/CurrentsGrounding Medium Power Recommendation Low Power Recommendation125 W Load Ratings 250 W Load Ratings350 W Load Ratings High Power RecommendationDynamic Loading Voltage RegulationVoltage Regulation Limits Optional +5V Regulation LimitsRipple / Noise Capacitive LoadingCapacitive Loading Conditions Ripple and NoiseOutput Voltage Timing Timing RequirementsRecommended Description Turn On/Off TimingTurn On/Off Timing Signal Power Supply Current Limit Protection Circuits240VA Protection Over Current ProtectionOver Voltage Protection Over Temperature ProtectionOver Voltage Limits Output VoltagePSON# Control and Indicator FunctionsPSON# Signal Characteristic Pwok Signal Characteristics Pwok Power OKACWarning ACWarning Signal CharacteristicsFRU Device Information Field Replacement Unit FRU SignalsArea Type Description FRU Device Product Information AreaField Name PS Info Field Information Definition FRU Device MultiRecord AreaPower Supply Condition Power Supply LED LED IndicatorLED Indicators ∙ TUV ∙ VDE Agency Requirements

EPS1U specifications

The Intel EPS1U is a powerful and compact single-board computer designed to cater to the growing demands of edge computing, IoT applications, and industrial automation. This system boasts a range of features tailored for versatility, performance, and reliability in various environments.

At the heart of the EPS1U is Intel's cutting-edge architecture, which utilizes low-power processors that deliver robust performance without compromising energy efficiency. This makes the EPS1U suitable for operations in constrained environments where thermal and power management is critical. The board supports various Intel processors, allowing users to select the right balance between performance and power consumption for their specific applications.

One of the standout characteristics of the EPS1U is its extensive I/O capabilities. With multiple USB ports, GPIO pins, and support for various communication protocols such as Ethernet, RS-232, and CAN bus, the EPS1U can connect seamlessly to a wide array of peripherals and networked devices. This connectivity makes it an ideal choice for implementing IoT solutions, enabling real-time data collection and analysis.

The EPS1U is equipped with advanced technologies such as Intel's RealSense for depth sensing and vision processing, providing unparalleled capabilities for robotic applications and computer vision tasks. Additionally, the board supports Intel's OpenVINO toolkit, which optimizes deep learning and computer vision workloads for enhanced performance on edge devices, making it easier for developers to deploy AI-powered applications.

Another notable feature of the EPS1U is its rugged design, ensuring reliability in challenging conditions. The board is built to withstand vibrations, extreme temperatures, and shock, which is essential for industrial deployments or outdoor applications. This durability ensures consistent performance in environments where standard consumer-grade components might fail.

Furthermore, the EPS1U provides extensive support for software development, offering compatibility with various operating systems, including Linux and Windows, along with comprehensive SDKs. This allows developers to quickly create applications tailored to their specific needs, accelerating the time to market for innovative solutions.

Overall, the Intel EPS1U represents a significant step forward in the evolution of edge computing platforms, with its combination of performance, connectivity, and durability. Whether for smart factories, automated systems, or advanced IoT applications, the EPS1U stands out as a versatile and powerful solution for modern digital transformation initiatives.
Top Page Image Contents