Intel GA-N680SLI-DQ6 user manual ATX12V2X / ATX Power Connector

Page 24

English

1/2) ATX_12V_2X / ATX (Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly.

The ATX 12V (2x4-pin) power connector mainly supplies power to the CPU. If the ATX 12V (2x4) power connector is not connected, the system will not start. If you wish to install a power supply that provides ATX 12V (2x2-pin) power connector, please connect the ATX 12V power connector to the Pin 3, 4, 7, 8 of the onboard ATX_12V_2X power connector according to the pin definitions. Important Use of a power supply providing an ATX 12V (2x4-pin) power connector is recom- mended by processor manufacturer when using Intel® Pentium® Extreme Edition series processors (130W or greater).

Caution! Please use a power supply that is able to handle the system voltage requirements. It is recommended that a power supply that can withstand high power consumption be used (400W or greater). If a power supply is used that does not provide the required power, the result can lead to an unstable system or a system that is unable to start. If you use a power supply that provides a 24-pin ATX or 2x4 pin ATX 12V power connector, please remove the small cover on the power connector on the motherboard before plugging in the power cord; otherwise, please do not remove it.

 

 

Pin No.

Definition

8

4

1

GND

 

 

2

GND

 

 

3

GND

5

1

4

GND

5

+12V

 

ATX_12V_2X

 

6

+12V

 

 

 

 

7

+12V

 

 

8

+12V

12

24

Pin No.

Definition

Pin No.

Definition

1

3.3V

13

3.3V

 

 

 

 

2

3.3V

14

-12V

 

 

3

GND

15

GND

 

 

4

+5V

16

PS_ON(soft On/Off)

 

 

5

GND

17

GND

 

 

6

+5V

18

GND

 

 

7

GND

19

GND

 

 

8

Power Good

20

-5V

 

 

9

5V SB(stand by +5V)

21

+5V

 

 

10

+12V

22

+5V

 

 

11

+12V(Only for 24-pin ATX)

23

+5V (Only for 24-pin ATX)

1

13

12

3.3V(Only for 24-pin ATX)

24

GND(Only for 24-pin ATX)

ATX

GA-N680SLI-DQ6 Motherboard

- 24 -

Image 24
Contents GA-N680SLI-DQ6 Motherboard Copyright Product Manual ClassificationTable of Contents Drivers Installation Item Checklist GA-N680SLI-DQ6 Motherboard Layout Block Diagram Considerations Prior to Installation Installation NoticesInstances of Non-Warranty Preparing Your ComputerFeature Summary CPUBios English Installation of the CPU and CPU Cooler Installation of the CPUInstallation of the CPU Cooler Installation of Memory Dual Channel Memory Configuration Installation of Expansion Cards Connecting the e-SATA Cable Kit Setup of SLI Scalable Link Interface Configuration Before you beginConnecting Two Graphics Cards Graphics Card Driver Setting I/O Back Panel Introduction Connectors Introduction MICATX12V2X / ATX Power Connector PCIE12V Power Connector 6 Cpufan / Sysfan / Pwrfan Cooler Fan Power ConnectorFDD Floppy Connector Nbfan North Bridge Fan HeaderIDE IDE Connector Pwrled Battery Fpanel Front Panel JumperFaudio Front Audio Connector Cdin CD in ConnectorSpdifin S/PDIF In Connector USB1 / FUSB2 / FUSB3 Front USB Connector19 F11394 / F21394 Front Ieee 1394 Connector LPT ConnectorTPM Connector Trusted Platform Module CI Chassis Intrusion, Case OpenClrcmos Clear Cmos Status Page Setup Menu / Option Page Setup Menu Main MenuDEL Bios Setup/Dual Bios F9 Xpress Recovery2F12 Boot Menu Startup ScreenMain Menu For example Bios Ver. FAa „ Load Fail-Safe Defaults „ Load Optimized Defaults„ Set Supervisor Password „ Set User PasswordDate TimeIDE Channel 0 Master, Slave IDE Channel 2/3/4/5/6/7 MasterFloppy 3 Mode Support for Japan Area Drive aHalt on MemoryHard Disk Boot Priority First / Second / Third Boot DevicePassword Check HDD S.M.A.R.T. Capability CPU Hyper-Threading NoteLimit Cpuid Max. to 3 Note No-Execute Memory ProtectNoteIntegrated Peripherals IDE Prefetch Mode Serial-ATA RAID ConfigOn-Chip IDE Channel0 NV Serial-ATA ControllerOnboard SATA-II Ctrl1 GSATAII1-0 / GSATAII1-1 connectors Onboard SATA-II Ctrl1 ModeOnboard SATA-II Ctrl2 GSATAII2-0 / GSATAII2-1 connectors Onboard SATA-II Ctrl2 ModeWhen LAN Cable Is Functioning Normally Onboard LAN Boot ROM Onboard Audio FunctionOn-Chip USB USB Keyboard SupportParallel Port Mode ECP Mode Use DMAOnboard Parallel Port Power-On by Alarm Modem Ring OnUSB Resume from Suspend Power On By Mouse Power On By KeyboardKB Power on Password Hpet Support NotePnP/PCI Configurations Current System/CPU Temperature Current CPU/SYSTEM/POWER FAN Speed RPMCPU Warning Temperature CPU/SYSTEM/POWER FAN Fail WarningCPU Smart FAN Mode CPU Smart FAN ControlNoteSystem Smart FAN Control System Clock Setting MB Intelligent TweakerM.I.TFSB-Memory Clock Mode SLI-Ready MemoryFSB-Memory Ratio CPU Host FrequencyRobust Graphics Booster CPU Clock Ratio NoteSystem Voltage Control DDR2 Voltage ControlLoad Fail-Safe Defaults Set Supervisor/User Password Save & Exit Setup Exit Without SavingEnglish Drivers Installation Install Chipset DriversSoftware Applications Driver CD InformationHardware Information Contact UsEnglish Unique Software Utilities EasyTune 5 IntroductionUser Interface Overview Xpress Recovery2 Introduction How to use the Xpress Recovery2System requirements Main Screen of Xpress Recovery2 PrecautionsLimitations Flash Bios Method Introduction What is Dual Bios Technology ?How to use Dual Bios and Q-Flash Utility? Boot From Main BIOSDefault, Backup Bios Halt On Error DisableDefault, EnableUpdating the Bios Method 1 Q-FlashTMBefore Use Copy Bios completed Pass Please press any key to continue English Method 2 @BIOSTM Utility Methods and stepsEnglish Before you begin IDE Step Save and exit Bios Setup Configuring RAID set in RAID Bios YES BBS Cd bootdrv Menu Making a Sata Driver DiskInstalling Sata controller driver during OS installation ENTER=Select F3=Exit Enter= Continue R=Repair F3=Exit RAID Step Save and exit Bios Setup GA-N680SLI-DQ6 Motherboard Configuring RAID array in RAID Bios Create Array StepsGraid RDD0 Graid Stripe Status Normal 240 GB Delete Array Making a Sata Driver Disk Required for Ahci and RAID Mode Windows Setup ENTER=Select F3=Exit Enter= Continue R=Repair F3=Exit Stereo Speakers Connection and Settings 5 2- / 4- / 6- / 8- Channel Audio Function IntroductionChannel Audio Setup English English Sound Effect Configuration Enabling the DTS Digital Theater Systems function Digital PCM Output Setup Introduction of Dolby Digital LiveWindows Vista ReadyBoost Troubleshooting GA-N680SLI-DQ6 Motherboard 106 107 GA-N680SLI-DQ6 Motherboard 108 109 Contact Us Taiwan HeadquartersGigabyte Global Service System 112

GA-N680SLI-DQ6 specifications

The Intel GA-N680SLI-DQ6 is a compelling motherboard designed primarily for enthusiasts and high-performance computing, leveraging NVIDIA's nForce 680i SLI chipset. This motherboard caters to gamers and professionals who demand advanced features and exceptional performance.

One of the standout features of the GA-N680SLI-DQ6 is its support for NVIDIA SLI technology, which allows users to install multiple NVIDIA graphics cards in parallel for enhanced graphical performance. This is particularly beneficial for gamers looking to achieve high frame rates and stunning visuals in demanding titles. With this SLI capability, the motherboard supports up to four PCI Express x16 lanes, providing ample bandwidth for multiple GPUs.

The GA-N680SLI-DQ6 is built on the ATX form factor, offering a variety of expansion slots and connectivity options. Featuring four DIMM slots, the motherboard supports up to 8GB of DDR2 memory, which can be clocked at speeds up to 800 MHz. This high memory capacity is essential for multitasking and running memory-intensive applications smoothly.

In terms of storage, the motherboard provides six SATA II ports, allowing users to connect multiple hard drives for impressive storage capabilities. Additionally, it supports RAID 0, 1, 0+1, and 5 configurations, which enhances data redundancy and performance. This flexibility is attractive for users who require both speed and data security.

To enhance audio quality, the GA-N680SLI-DQ6 integrates Realtek ALC888 audio codec, delivering 7.1 channel surround sound. This is vital for gamers and media creators who need immersive sound experiences.

With an eye towards overclocking, the motherboard includes features such as robust power delivery systems and comprehensive BIOS options, enabling users to push their hardware to its limits. The onboard diagnostics LED indicators are also a significant asset, making troubleshooting straightforward.

Overall, the Intel GA-N680SLI-DQ6 stands out for its advanced SLI support, impressive memory capacity, extensive connectivity, and robust performance features, making it an excellent choice for gamers and power users looking to build a high-end PC. Its combination of cutting-edge technologies and thoughtful design characteristics ensure that it remains a relevant option in the competitive motherboard market.