Intel GA-N680SLI-DQ6 user manual Boot From Main BIOSDefault, Backup Bios

Page 69

c . Dual BIOS Item explanation:

Wide Range Protection: Disable(Default), Enable

Status 1:

If any failure (ex. Update ESCD failure, checksum error or reset? occurs in the Main BIOS, just before the Operating System is loaded and after the power is on, and that the Wide Range Protection is set to "Enable", the PC will boot from Backup BIOS automatically.

Status 2:

If the ROM BIOS on peripherals cards(ex. SCSI Cards, LAN Cards,..) emits signals to request restart of the system after the user make any alteration on it, the boot up BIOS will not be changed to the Backup BIOS.

Boot From : Main BIOS(Default), Backup BIOS

Status 1:

The user can set to boot from Main BIOS or Backup BIOS. Status 2:

If one of the Main BIOS or the Backup BIOS fails, this item "Boot From : Main BIOS(Default)" will become gray and will not be changed by user.

Auto Recovery : Enable(Default), Disable

When one of the Main BIOS or Backup BIOS occurs checksum failure, the working BIOS will automati- cally recover the BIOS of checksum failure.

(In the Power Management Setup of the BIOS Setting, if ACPI Suspend Type is set to Suspend to RAM, the Auto Recovery will be set to Enable automatically.)

(If you want to enter the BIOS setting, please press "Del" key when the boot screen appears.)

Halt On Error : Disable(Default), Enable

If the BIOS occurs a checksum error or the Main BIOS occurs a WIDE RANGE PROTECTION error and Halt On Error set to Enable, the PC will show messages on the boot screen, and the system will pause and wait for the user's instruction.

If Auto Recovery :Disable, it will show <or the other key to continue.>

If Auto Recovery :Enable, it will show <or the other key to Auto Recover.>

Keep DMI Data : Enable(Default), Disable

Enable: The DMI data won't be replaced by flashing new BIOS.(recommend)

Disable: The DMI data will be replaced by flashing new BIOS.

Copy Main ROM Data to Backup

(If you boot from Backup ROM, this item will change to Copy Backup ROM Data to Main) Auto recovery message:

BIOS Recovery: Main to Backup

The means that the Main BIOS works normally and could automatically recover the Backup BIOS.

BIOS Recovery: Backup to Main

The means that the Backup BIOS works normally and could automatically recover the Main BIOS. (This auto recovery utility is set by system automatically and can’t be changed by user.)

Load Default Settings

Load dual BIOS default value.

Save Settings to CMOS

Save revised setting.

- 69 -

Appendix

English

Image 69
Contents GA-N680SLI-DQ6 Motherboard Product Manual Classification CopyrightTable of Contents Drivers Installation Item Checklist GA-N680SLI-DQ6 Motherboard Layout Block Diagram Installation Notices Considerations Prior to InstallationInstances of Non-Warranty Preparing Your ComputerCPU Feature SummaryBios English Installation of the CPU Installation of the CPU and CPU CoolerInstallation of the CPU Cooler Installation of Memory Dual Channel Memory Configuration Installation of Expansion Cards Connecting the e-SATA Cable Kit Before you begin Setup of SLI Scalable Link Interface ConfigurationConnecting Two Graphics Cards Graphics Card Driver Setting I/O Back Panel Introduction MIC Connectors IntroductionATX12V2X / ATX Power Connector 6 Cpufan / Sysfan / Pwrfan Cooler Fan Power Connector PCIE12V Power ConnectorNbfan North Bridge Fan Header FDD Floppy ConnectorIDE IDE Connector Pwrled Fpanel Front Panel Jumper BatteryCdin CD in Connector Faudio Front Audio ConnectorUSB1 / FUSB2 / FUSB3 Front USB Connector Spdifin S/PDIF In ConnectorLPT Connector 19 F11394 / F21394 Front Ieee 1394 ConnectorCI Chassis Intrusion, Case Open TPM Connector Trusted Platform ModuleClrcmos Clear Cmos Main Menu Status Page Setup Menu / Option Page Setup MenuF9 Xpress Recovery2 DEL Bios Setup/Dual BiosF12 Boot Menu Startup ScreenMain Menu For example Bios Ver. FAa „ Load Optimized Defaults „ Load Fail-Safe Defaults„ Set Supervisor Password „ Set User PasswordTime DateIDE Channel 0 Master, Slave IDE Channel 2/3/4/5/6/7 MasterDrive a Floppy 3 Mode Support for Japan AreaHalt on MemoryHard Disk Boot Priority First / Second / Third Boot DevicePassword Check CPU Hyper-Threading Note HDD S.M.A.R.T. CapabilityLimit Cpuid Max. to 3 Note No-Execute Memory ProtectNoteIntegrated Peripherals Serial-ATA RAID Config IDE Prefetch ModeOn-Chip IDE Channel0 NV Serial-ATA ControllerOnboard SATA-II Ctrl1 Mode Onboard SATA-II Ctrl1 GSATAII1-0 / GSATAII1-1 connectorsOnboard SATA-II Ctrl2 GSATAII2-0 / GSATAII2-1 connectors Onboard SATA-II Ctrl2 ModeWhen LAN Cable Is Functioning Normally Onboard Audio Function Onboard LAN Boot ROMOn-Chip USB USB Keyboard SupportParallel Port Mode ECP Mode Use DMAOnboard Parallel Port Power-On by Alarm Modem Ring OnUSB Resume from Suspend Power On By Keyboard Power On By MouseKB Power on Password Hpet Support NotePnP/PCI Configurations Current CPU/SYSTEM/POWER FAN Speed RPM Current System/CPU TemperatureCPU Warning Temperature CPU/SYSTEM/POWER FAN Fail WarningCPU Smart FAN Mode CPU Smart FAN ControlNoteSystem Smart FAN Control MB Intelligent TweakerM.I.T System Clock SettingSLI-Ready Memory FSB-Memory Clock ModeFSB-Memory Ratio CPU Host FrequencyCPU Clock Ratio Note Robust Graphics BoosterSystem Voltage Control DDR2 Voltage ControlLoad Fail-Safe Defaults Set Supervisor/User Password Exit Without Saving Save & Exit SetupEnglish Install Chipset Drivers Drivers InstallationDriver CD Information Software ApplicationsContact Us Hardware InformationEnglish Unique Software Utilities EasyTune 5 IntroductionUser Interface Overview Xpress Recovery2 Introduction How to use the Xpress Recovery2System requirements Main Screen of Xpress Recovery2 PrecautionsLimitations Flash Bios Method Introduction What is Dual Bios Technology ?How to use Dual Bios and Q-Flash Utility? Halt On Error DisableDefault, Enable Boot From Main BIOSDefault, Backup BiosUpdating the Bios Method 1 Q-FlashTMBefore Use Copy Bios completed Pass Please press any key to continue English Methods and steps Method 2 @BIOSTM UtilityEnglish Before you begin IDE Step Save and exit Bios Setup Configuring RAID set in RAID Bios YES BBS Making a Sata Driver Disk Cd bootdrv MenuInstalling Sata controller driver during OS installation ENTER=Select F3=Exit Enter= Continue R=Repair F3=Exit RAID Step Save and exit Bios Setup GA-N680SLI-DQ6 Motherboard Configuring RAID array in RAID Bios Steps Create ArrayGraid RDD0 Graid Stripe Status Normal 240 GB Delete Array Making a Sata Driver Disk Required for Ahci and RAID Mode Windows Setup ENTER=Select F3=Exit Enter= Continue R=Repair F3=Exit 5 2- / 4- / 6- / 8- Channel Audio Function Introduction Stereo Speakers Connection and SettingsChannel Audio Setup English English Sound Effect Configuration Enabling the DTS Digital Theater Systems function Introduction of Dolby Digital Live Digital PCM Output SetupWindows Vista ReadyBoost Troubleshooting GA-N680SLI-DQ6 Motherboard 106 107 GA-N680SLI-DQ6 Motherboard 108 109 Taiwan Headquarters Contact UsGigabyte Global Service System 112

GA-N680SLI-DQ6 specifications

The Intel GA-N680SLI-DQ6 is a compelling motherboard designed primarily for enthusiasts and high-performance computing, leveraging NVIDIA's nForce 680i SLI chipset. This motherboard caters to gamers and professionals who demand advanced features and exceptional performance.

One of the standout features of the GA-N680SLI-DQ6 is its support for NVIDIA SLI technology, which allows users to install multiple NVIDIA graphics cards in parallel for enhanced graphical performance. This is particularly beneficial for gamers looking to achieve high frame rates and stunning visuals in demanding titles. With this SLI capability, the motherboard supports up to four PCI Express x16 lanes, providing ample bandwidth for multiple GPUs.

The GA-N680SLI-DQ6 is built on the ATX form factor, offering a variety of expansion slots and connectivity options. Featuring four DIMM slots, the motherboard supports up to 8GB of DDR2 memory, which can be clocked at speeds up to 800 MHz. This high memory capacity is essential for multitasking and running memory-intensive applications smoothly.

In terms of storage, the motherboard provides six SATA II ports, allowing users to connect multiple hard drives for impressive storage capabilities. Additionally, it supports RAID 0, 1, 0+1, and 5 configurations, which enhances data redundancy and performance. This flexibility is attractive for users who require both speed and data security.

To enhance audio quality, the GA-N680SLI-DQ6 integrates Realtek ALC888 audio codec, delivering 7.1 channel surround sound. This is vital for gamers and media creators who need immersive sound experiences.

With an eye towards overclocking, the motherboard includes features such as robust power delivery systems and comprehensive BIOS options, enabling users to push their hardware to its limits. The onboard diagnostics LED indicators are also a significant asset, making troubleshooting straightforward.

Overall, the Intel GA-N680SLI-DQ6 stands out for its advanced SLI support, impressive memory capacity, extensive connectivity, and robust performance features, making it an excellent choice for gamers and power users looking to build a high-end PC. Its combination of cutting-edge technologies and thoughtful design characteristics ensure that it remains a relevant option in the competitive motherboard market.