Controls and functions
Projector
1
2
3 | 4 | 5 | 6 | 7 | 8 | 9 |
10
11
12 
8
1.Focus ring
Adjusts the focus of the projected image. See
2.Zoom ring
Adjusts the size of the image. See "Fine- tuning the image size and clarity" on page 19 for details.
3.
Power/Power indicator light Toggles the projector on or off.
See "Start up" on page 17 and "Shutting down the projector" on page 28 for details.
4.AUTO
Automatically determines the best picture timings for the displayed image. See
5.SOURCE
Displays the source selection bar. See "Switching input signal" on page 18 for details.
6.MENU/EXIT
Turns on the
Goes back to previous OSD menu, exits and saves menu settings.
See "Using the menus" on page 31 for details.
7.Temperature warning light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 42 for details.
8.Keystone/Arrow buttons ( 
/
Up,
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 20 for details.
9.Lamp indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 42 for details.
ViewSonic | 3 | PJ513D/PJ513DB |