Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input. See "Connection" on page 11 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound,
1.Press MENU/EXIT and then press /
until the SYSTEM SETUP: Advanced menu is highlighted.
2.Press to highlight Audio Settings and press MODE/ENTER on the projector or Mode/enter on the remote control. The Audio Settings page displays.
3.Highlight Mute and press /
to select On.
Adjusting the sound level
To adjust the sound level,
1.Repeat steps
2.Press to highlight Volume and press
/
to select a desired sound level.
Personalizing the projector menu display
The
•Menu Display Time in the SYSTEM SETUP: Advanced > Menu Settings menu sets the length of time the OSD will remain active after your last button press. The time
length ranges from 5 to 30 seconds in /
to select a suitable time.
•Menu Position in the SYSTEM SETUP: Advanced > Menu Settings menu sets the OSD position in five locations. Use /
to select a preferred position.
•Language in the SYSTEM SETUP: Basic menu sets your familiar language for the /
to select your language.
•Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be displayed during projector /
to select a screen.
ViewSonic | 27 | PJ513D/PJ513DB |