Classe Audio SSP-300 owner manual

Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

NOTICE

All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark.

This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

This product incorporates copyright protection technology that is protected by U.S. patents ad other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

The information contained in the manual is subject to change without notice. The most current version of this manual will be posted on our web site at http://www.classeaudio.com.

Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

Classe products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.

Please record the serial number for your new Classé component here for future reference.

Serial #: __________________

Image 2
Contents SSP-300 Surround Processor Page Important Safety Instructions Contents OSD Welcome to the Classé family Unpacking and Placement Placement Ventilation Custom installations Serial numberPage Operating Voltage Word About Installation THX Ultra Special Design FeaturesTranscoding Re-Equalization Timbre Matching Adaptive Decorrelation Advanced Speaker Array THX Ultra 2 Music Mode THX Ultra 2 Cinema Mode Boundary Gain Compensation flexible GUIHighly refined circuit design Extensive listening tests Extraordinary longevity Connect your source components to the SSP-300 Initial SetupConnect your SSP-300 to your power amplifiers Special Note for Subwoofer Please take a moment to read the rest of this manual Flashing after power-up Standby button & LED indicatorFlashing on power-up Initialization StandbyMute button Menu buttonLCD touchscreen IR windowVolume Knob Rear Panel Composite Video InputsComposite Video Outputs Video InputsCoaxial Digital Inputs Video OutputsOptical Digital Audio Output Classé can Bus Control Ports Optical Digital InputsAES/EBU Digital Input IR Input Main and Zone DC Trigger OutputsAnalog Audio Outputs stereo Microphone InputAnalog Audio Inputs 16 7.1 Channel Analog Audio InputComponent Video Inputs and Output AC Mains Power Switch Basic Functions Remote ControlVolume Keys Audio Processing KeysNavigation and Control Menu Keys F1/F2/F3/F4 keysUnderstanding Surround Sound How many channels? Matrix or discrete?Multichannel formats Post-processing possibilitiesNameDescription Using the SSP-300 Source selectionMode selection Video preview Controls System trims Zone control Position select System setup Menu SystemVolume setup RotaryPage Max volume Startup volume Mute setup Input setup Page Page Speaker setup Page Profiles Triggers setup Teach IR Display setupBrightness Timeout Language Important NoteTemp. display Volume Dolby/DTS setupDolby Pro Logic DTS Neo6 Remote FkeysStatus Version info SensorsTroubleshooting Everything appears to be on, but there is no soundThere is a hum coming out of the speakers IR remote control seems not to functionOnly one speaker seems to be playing There is a hum coming from the unitCare & Maintenance Classé Audio SpecificationsDistortion THD + noise Dimensions Classé Audio
Related manuals
Manual 62 pages 8.2 Kb