Intel 747116-011 manual Configuring the Server for LAN Access, Option Entry

Page 12

13. Enter the following in the Emergency Management Port (EMP) dialog box:

Option

Entry

Enter New Password:

Enter the EMP password, up to 16 characters.

Verify New Password:

Re-enter the EMP password.

ESC Sequence:

+++ (default)

Hangup String:

ATH (default)

Modem Init String:

ATE1Q0V1X4&D0S0=0 (default). May require change based on the installed

 

modem requirements.

System Phone Number:

The phone number to access the EMP port connect to port COM2.

Access Mode:

Always Active. [default is Preboot]

Restricted Mode:

Disable. [default is Enable]

Connection Mode:

Modem Connect(default) for modem connections to COM2. Serial Connect

 

for direct serial connections to COM2.

14.Click Save, then Close.

15.Exit from the Server SSU.

16.Quit the Server Board CD-ROM menu.

17.Remove the Software Kit CD from the CD-ROM reader.

18.Reboot server and select F2 to re-enter BIOS setup.

19.Select Server.

20.Toggle “LAN Redirection” to enable.

21.Press “ESC” and save changes before rebooting.

Configuring the Server for LAN Access

To take advantage of LAN access and BMC LAN-Alerts features, server settings must be configured using the server System Setup Utility (SSU). After the settings are initialized they can be changed using the Client System Setup Utility (CSSU).

If you are going to define a SNMP community, be sure to do it before installing ISC.

1.Insert the Software Kit CD into the CD-ROM reader.

2.Restart the server.

3.When the “F2 to enter setup” message appears, quickly press F2.

4.In Setup, use the arrow keys to select the Boot menu.

5.Use the arrow keys to select Boot Device Priority then press Enter.

6.Select ATAPI CDROM and use the + key to move the selection to the top of the list.

7.Press F10.

8.Select Yes to confirm saving of the current settings and press Enter. The server restarts and boots from the Software Kit CD.

9.When the Server Board CD-ROM menu appears, use the arrow keys to select the Utilities menu and press Enter.

10.Select “Run System Utility” under the “Utilities” menu. You will see SSU executables installed the first time and then the Server SSU launches.

11.In the Available Tasks list select Platform Event Manager and click OK.

12

Installation Guide for the Intel Server Control

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Intel Server Control ForContents Launching ISC Page Platform Compatibility System Requirements Managed Server RequirementsWindows 2000/NT Requirements NetWare RequirementsConsole Requirements Red Hat Linux RequirementsSCO UnixWare Requirements Additional Requirements for DMI-SNMP TranslationWindows 98 Second Edition Windows 2000/NTService Partition and Population Service Partition InstallationRequirements Installation Boot the Server from the Service Partition Locally Booting the Server from the Service Partition BootRemotely Booting the Server from the Service Partition Boot Configuring EMP and Console Redirection SettingsConfiguring the Server for LAN Access Option EntryUsing the DPC Console Manager Using the Client SSUInstalling ISC Compatibility and Upgrade IssuesManaged Server Preparation LSC and LdsmNetWare Windows NTUnixWare LSC, LDSM, Windows, NetWare, and UnixWare Installation Red Hat Linux InstallationRed Hat Linux WindowsInstalling Linux DMI Service Provider Installing ISC Server InstrumentationConfiguring the SNMP-DMI Mapper You should see file names similar to the followingCustomizing NetWare Servers After Setup Launching ISC LANDesk Server ManagerHP Network Node Manager CA-Unicenter TNGStand-alone ISC Console Launching the ISC Console with Internet BrowsersLaunching the ISC Console with Microsoft Management Console Features Platform Platform Compatibility MatrixSummary In-band Remote Management OS basedOut-of-Band Remote Management Out-of-Band AlertsRemote Boot/Access Service Partition Service Partition based FeaturesIn-Band Instrumentation based Alerts Enterprise Server Management Console Esmc Integration’s Installation Guide for the Intel Server Control

747116-011 specifications

The Intel 747116-011 is a notable component in the realm of advanced microprocessors, particularly recognized for its role in enhancing computing power and efficiency. This microprocessor is part of a series that employs cutting-edge technology to deliver robust performance across a range of applications. With its architecture optimized for high-speed processing, the Intel 747116-011 stands out for both its versatility and reliability.

One of the main features of the Intel 747116-011 is its multi-core architecture. This design enables the processor to handle multiple tasks simultaneously, enhancing multitasking capabilities and increasing overall system responsiveness. With several cores working in tandem, users can experience smoother performance during resource-intensive applications, such as gaming, video editing, and data processing.

The Intel 747116-011 also integrates advanced fabrication technologies, allowing for improved power efficiency and thermal management. The processor is built on a refined manufacturing process, which typically results in lower power consumption compared to its predecessors. This characteristic not only extends the longevity of the device it powers but also contributes to a quieter operation, a crucial factor for users who are sensitive to noise.

Another important aspect of the Intel 747116-011 is its compatibility with various memory technologies. With support for high-speed RAM, users can take advantage of faster data access and improved application performance. This compatibility is essential in today’s computing environment, where faster memory can greatly influence system capabilities, particularly in tasks requiring rapid data retrieval.

In terms of security features, the Intel 747116-011 incorporates integrated security measures designed to protect data and prevent unauthorized access. Features such as hardware-based encryption and secure boot capabilities help in safeguarding sensitive information, making it an ideal choice for enterprises and individuals alike.

Moreover, the Intel 747116-011 supports a broad range of connectivity options, ensuring that it can be integrated seamlessly into various systems. This flexibility is pivotal for users looking to build or upgrade their computing platforms, as it allows for better customization and adaptability to evolving technological trends.

In summary, the Intel 747116-011 is a microprocessor that embodies advanced computing technology with features that enhance performance, efficiency, and security. With its multi-core design, power-efficient architecture, memory compatibility, integrated security measures, and versatile connectivity, it caters to the demands of modern computing environments. Whether for personal use or business applications, the Intel 747116-011 remains a formidable choice in the microprocessor landscape.
Top Page Image Contents