PCI Risers, Hw Raid, List” in section | Intel TIGH2U specification

Notes on the TIGH2U Model 0 Configuration and Options:

PCI Risers

oThe base configuration comes standard with two PCI Risers supporting up to five PCI slots. These include:

One low-profile riser supporting two PCI-Express (PCIe) slots

One full-height, full-length riser supporting three slots: two PCIe x4 and one PCI-X.

oAdditional full-height, full-length risers (below) are supported and available as accessories (refer to “Production Spares/Accessories List” in section III).

PCI-X (active): three independent PCI-X, each with maximum 133 MHz

PCI-X (passive): two PCI-X with maximum 100 MHz and one PCI-X (66 MHz) all on a shared PCI bus

HW RAID

oWhile SW RAID 0/1/10 is supported on the base configuration, HW RAID 5 support can be enabled via a set of optional accessories (refer to “Production Spares/Accessories List” in section III).

oComponents required are NSCRAID01W (NSC2U RAID5 Kit – includes the I- Button (license), battery cable) and the AXXMINIDIMM (128 MB Mini DIMM

registered DDR-2 for RAID cache.)

oAn additional option is the AXXRSBBU3 (Intel® RAID Smart Battery Backup module provides up to 72 hours of cache memory retention when used with AXXMINIDIMM). The cable to connect the battery is included in the NSCRAID01W kit.

Intel® Z-U130 Value Solid State Drive

oSupport for the Intel® Z-U130 Value Solid State Drive is available via a selection of optional accessories (refer to “Production Spares/Accessories

List” in section III).

oComponents required are an Intel® Z-U130 Value Solid State (select desired capacity) as well as a mounting kit (TMWVSSDRIVE01W) to mount it inside the chassis.

oSolid state drives are available in several sizes, enabling an array of product customization options. These drives securely mount inside the chassis offering

Storage: independent of traditional disk drives

Boot OS from solid state drive; store data on hard drive Store backup image of boot drive

Add a server partition to the server Any other customer design options

3/28/2008

v 1.2

7 of 20