TIGH2U Base Model 0 Configuration
All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard drive or
The table below lists which components are included in the base model 0 SKUs and which ones must be ordered separately or as optional accessories.
Component Description | AC Mod 0 | DC Mod 0 |
| Configuration | Configuration |
AC power supply (600 W) | 1 included | - |
DC power supply (600 W) | - | 1 included |
Filler Panel in 2nd power supply bay | 1 included | |
Chassis (bezel, sheet metal, top cover, PCI carrier) | 1 included | |
Server Board T5000PAL | 1 included | |
Bezel (unpainted) | 1 included | |
PCI Riser | 1 included | |
PCI Riser LP (two | 1 included | |
8 included | ||
Trays for | 6 included | |
Filler Panel in optical device bay | 1 included | |
Rear Panel GbE NIC (Cu) ports (via Server Board) | 2 included | |
Server Deployment Toolkit (CD) | 1 included | |
Quick Start Guide | 1 included | |
Power Cable | Purchase separately1 | |
SW RAID 0/1/10 | Included | |
HW RAID 5 | Optional Accessories2 | |
Intel® | Optional Accessory2 | |
Mounting kit for Intel® | Optional Accessory2 | |
Remote Management Module 2 | Optional Accessory2 | |
Optional Accessories2 | ||
Ethernet I/O Module (dual Gigabit rear ports) | Optional Accessory2 | |
SAS I/O Expansion Module (x4 external rear port) | Optional Accessory2 | |
Rack Mount Kits | Optional Accessory3 | |
Processor (refer to “Details on Ordering Processors”) | Purchase separately4 | |
Heatsink | Accessory or purchase separately | |
Memory | Purchase separately4 | |
Hard Disk Drive | Purchase separately4 | |
Optical Drive | Purchase separately4 | |
1Refer to AC power cord accessory in this section |
|
|
2Refer to “Production Spares/Accessory List” in section III |
|
|
3Refer to “Rack Mounting Options” in the Appendix |
|
|
4Should be purchased separately (parts not listed in this document)
3/28/2008 | v 1.2 | 6 of 20 |