ViewSonic PJ1065 manual Replacing the Lamp

Page 20

Replacing the Lamp

1Switch the projector OFF, remove the power cord from the power outlet, and wait at least 45 minutes for the unit to cool.

2Prepare a new lamp.

3Check that the projector has cooled sufficiently, and gently turn it upside down.

4Loosen the screw as shown in the diagram, and remove the lamp cover.

5Loosen the two screws, and gently remove the lamp while holding the grips. Touching the inside of the lamp case may result in uneven coloring.

6Install the new lamp and tighten the two screws firmly. Also steadily push the opposite side of the screwed lamp into the unit.

7Replace the lamp cover in position and tighten the screw firmly.

8Gently turn the projector right-side up.

CAUTION

•Ensure that screws are tightened properly. Screws not tightened fully may result in injury or accidents.

•Do not use the projector with the lamp cover removed.

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp. When the lamp has been replaced after the LAMP indicator is red, or the CHANGE THE LAMP message is displayed, complete the following opera- tion within ten minutes of switching power ON. The power will be turned off automatically if over 10 minutes.

1Switch power ON, and press the RESET button, for approximately three seconds. The ‘LAMP xxxx hr’ message will appear on the lamp timer on the bottom of the screen.

2Press the MENU button on the remote control transmitter, or the RESET button on the control panel, while the lamp timer is displayed. The ‘LAMP xxxx □ → 0 ■ CANCEL’ message will then appear.

3Press the and select 0,and wait until the timer display is cleared.

NOTE: • Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.

18ViewSonic PJ1065

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PJ1065 Contents Electronic Warranty Registration For Your RecordsBefore USE FeaturesContents of Package Part Names Remote Control Device refer to page 9, Operations ButtonInserting the Batteries Angle Adjustment InstallationInstallation of the Projector and Screen Cabling Audio in RGB 1 / DVIPower Connection Example of system setupPower cord Plug & PlayPower on Power OFFOperations StandbyBasic Operation Volume Adjustment Press the Volume Select Mode of P.IN P. Display Press the PinP buttonAdjust Screen Size Press the Zoom Set / Clear Keystone Mode Press the KeystoneSetup Menu Automatic Adjustment at Video Input Select the Execute with Input MenuRGB Video NRSelect Position of P. in P. Display Press Select signal of P. in P. Display PressImage Menu Volume Adjustment Reduce Volume Set / Clear Whisper Mode PressOptions Menu Operation Start/Stop PressSelect Menu Background Color Select the color with No Signal MenuMenu Color Maintenance LampReplacing the Lamp Other Maintenance Air FiltersTroubleshooting OSD MessageIndicator Message Symptom Specifications SpecificationCustomer Support = FAXLimited Warranty Viewsonic ProjectorPower Cord Safety Guidelines AppendixFCC Information Compliance Information for CanadaCompliance Information for European Countries User Information for All CountriesViewSonic Corporation

PJ1065 specifications

The ViewSonic PJ1065 is a robust multimedia projector that has gained recognition for its impressive performance and versatility, making it an ideal choice for both professional settings and educational environments. With its cutting-edge technologies and user-friendly features, the PJ1065 serves as a reliable tool for presentations, lectures, and multimedia consumption.

One of the standout features of the PJ1065 is its native resolution of 1920 x 1080 pixels (Full HD), which delivers sharp and clear images. This high resolution ensures that text is legible, and visuals are detailed, enhancing the overall viewing experience. Additionally, it boasts a brightness level of 6,500 lumens, making it suitable for various lighting conditions, from dimly lit conference rooms to brightly lit classrooms. This high lumen output guarantees that images remain vivid and colorful, regardless of the ambient light.

Another significant characteristic of the PJ1065 is its contrast ratio of 3000:1, which provides deep blacks and vibrant colors. This flexibility enhances the projector's ability to display a wide range of content types, from PowerPoint presentations to videos, ensuring that the nuances of every image are captured effectively.

The PJ1065 incorporates advanced lamp technology, featuring a long-lasting lamp life of up to 20,000 hours in Eco mode. This longevity reduces the need for frequent replacements, lowering the total cost of ownership and making it economical for long-term use.

Connectively, the projector offers a variety of input options, including HDMI, VGA, and USB Type-A, allowing users to connect various devices effortlessly. Moreover, the PJ1065 supports wireless connectivity, enabling users to present content directly from laptops or mobile devices without the need for cumbersome cables.

The projector is designed with user convenience in mind, featuring an intuitive interface and remote control that simplifies navigation. Its compact design ensures easy transport and setup, making it a versatile solution for business professionals and educators on the go.

In summary, the ViewSonic PJ1065 combines high brightness, excellent resolution, and multiple connectivity options in a compact and efficient design, making it an outstanding choice for anyone seeking a reliable and high-performing multimedia projector for various applications.
Top Page Image Contents