ViewSonic PJ1065 manual Troubleshooting, OSD Message

Page 22

TROUBLESHOOTING

OSD Message

The messages as described below may appear on the screen at power ON. Take the appropriate mea- sures when such messages appear.

 

Table 9: OSD Message

Message

Contents

 

 

CHANGE THE LAMP

The usage time of lamp will be reaching 2000 hr shortly (*2).

AFTER REPLACING LAMP,

It is recommended to replace the lamp soon. Prepare a new lamp

RESET THE LAMP TIME.

as replacement.

(*1)

 

 

 

CHANGE THE LAMP

The usage time of lamp will be reaching 2000 hr shortly.

AFTER REPLACING LAMP,

It is recommended to replace the lamp within * * hours (*2).

RESET THE LAMP TIME.

It might happen that the lamp is cut off before * * hr by any

THE POWER WILL TURN

chance. Power will be switched OFF automatically in * * hours.

OFF

Replace the lamp as shown on p. 17-18, “Lamp.” Always reset

AFTER **hr.

the lamp timer after replacing the lamp.

(*1)

 

 

 

CHANGE THE LAMP

The usage time of lamp is about to reach. Power will be switched

AFTER REPLACING LAMP,

OFF in a few minutes (*2).

RESET THE LAMP TIME.

Switch power OFF immediately and replace the lamp as shown

THE POWER WILL

on p. 17-18, “Lamp.” Always reset the lamp timer after replacing

TURN OFF

the lamp.

AFTER 0 hr.

 

 

 

NO INPUT IS DETECTED

No input signal found.

ON ***

Check the signal input connections and signal sources.

 

 

SYNC IS OUT OF RANGE

The horizontal or vertical frequency of the input signal is not

within the specified range.

ON ***

Check the specifications of the equipment and the signal source.

 

 

 

 

The internal temperature has risen.

 

Switch power OFF, and wait 20 minutes until the equipment cools

 

down.

CHECK THE AIR FLOW

Check the following and Switch power ON again.

 

* Are the ventilation openings blocked.

 

* Is the air filter dirty.

 

* Is the ambient temperature higher than 35°C.

 

 

NOTE:

(*1) This message is cleared automatically after approximately three minutes, and appears every time power is switched ON.

(*2) The unit has a function to turn the power off which will be active when the usage time reaches 2000 hr. However the life of lamp might be much different, so that it might happen that a lamp is cut off before the function is active.

20 ViewSonic PJ1065

Image 22
Contents PJ1065 Contents Electronic Warranty Registration For Your RecordsContents of Package FeaturesBefore USE Part Names Remote Control Device refer to page 9, Operations ButtonInserting the Batteries Installation of the Projector and Screen InstallationAngle Adjustment Cabling Audio in RGB 1 / DVIPower cord Power ConnectionExample of system setup Plug & PlayOperations Power onPower OFF StandbyBasic Operation Adjust Screen Size Press the Zoom Volume Adjustment Press the VolumeSelect Mode of P.IN P. Display Press the PinP button Set / Clear Keystone Mode Press the KeystoneSetup Menu RGB Automatic Adjustment at Video Input Select the Execute withInput Menu Video NRImage Menu Select signal of P. in P. Display PressSelect Position of P. in P. Display Press Options Menu Volume Adjustment Reduce VolumeSet / Clear Whisper Mode Press Operation Start/Stop PressMenu Color No Signal MenuSelect Menu Background Color Select the color with Maintenance LampReplacing the Lamp Other Maintenance Air FiltersTroubleshooting OSD MessageIndicator Message Symptom Specifications SpecificationCustomer Support = FAXLimited Warranty Viewsonic ProjectorPower Cord Safety Guidelines AppendixCompliance Information for European Countries FCC InformationCompliance Information for Canada User Information for All CountriesViewSonic Corporation

PJ1065 specifications

The ViewSonic PJ1065 is a robust multimedia projector that has gained recognition for its impressive performance and versatility, making it an ideal choice for both professional settings and educational environments. With its cutting-edge technologies and user-friendly features, the PJ1065 serves as a reliable tool for presentations, lectures, and multimedia consumption.

One of the standout features of the PJ1065 is its native resolution of 1920 x 1080 pixels (Full HD), which delivers sharp and clear images. This high resolution ensures that text is legible, and visuals are detailed, enhancing the overall viewing experience. Additionally, it boasts a brightness level of 6,500 lumens, making it suitable for various lighting conditions, from dimly lit conference rooms to brightly lit classrooms. This high lumen output guarantees that images remain vivid and colorful, regardless of the ambient light.

Another significant characteristic of the PJ1065 is its contrast ratio of 3000:1, which provides deep blacks and vibrant colors. This flexibility enhances the projector's ability to display a wide range of content types, from PowerPoint presentations to videos, ensuring that the nuances of every image are captured effectively.

The PJ1065 incorporates advanced lamp technology, featuring a long-lasting lamp life of up to 20,000 hours in Eco mode. This longevity reduces the need for frequent replacements, lowering the total cost of ownership and making it economical for long-term use.

Connectively, the projector offers a variety of input options, including HDMI, VGA, and USB Type-A, allowing users to connect various devices effortlessly. Moreover, the PJ1065 supports wireless connectivity, enabling users to present content directly from laptops or mobile devices without the need for cumbersome cables.

The projector is designed with user convenience in mind, featuring an intuitive interface and remote control that simplifies navigation. Its compact design ensures easy transport and setup, making it a versatile solution for business professionals and educators on the go.

In summary, the ViewSonic PJ1065 combines high brightness, excellent resolution, and multiple connectivity options in a compact and efficient design, making it an outstanding choice for anyone seeking a reliable and high-performing multimedia projector for various applications.