ViewSonic PJ256D manual Using the Remote Control Power, Auto, Hide, Laser Button, Freeze

™Remark : “*” this is computer mode only. And these functions are only available when the projector is connected to a computer via an USB cable.

Using the Remote Control

Power

4Refer11-12.to the “Power On/Off the Projector” section on pages

Source

4Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources.

Auto

4Automatically synchronizes the projector to the input source.

Keystone

4Adjusts image distortion caused by tilting the projector (±8

degrees). Press “Keystone” button, then use to adjust the

setting.

Hide

4“Hide” immediately turns the screen black. Press “Hide” again to restore the displayed image.

Laser Button

4Aim the remote at the viewing screen, press and hold this button to activate the laser pointer.

Freeze

4Press “Freeze” to pause the screen image.

Mouse/Mouse Right Click/Mouse Left Click (*)

4These functions are the same as a mouse of PC or Mac.

Four Directional Select Keys

4Useyour selection. to select items or make adjustments to

Enter

4Confirm your selection of items.

Menu

4Press “Menu” to launch the on screen display menu. To exit OSD, press “Menu” again.

ViewSonic PJ256D 16