On Screen Display Menus
The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect
the source.
How to operate
1.To open the OSD menu, press “Menu 
” on the Remote Control or Control Panel.
2.When OSD is displayed, use 
keys to select any item in the main menu. While making a selection on a particular page, press 
or “Enter” key to enter sub menu.
3.Use 
keys to select the desired item and adjust the
settings by 
key.
4.Select the next item to be adjusted in the sub menu and adjust as described above.
5.Press “Menu 
” to confirm, and the screen will return to the main menu.
6.To exit, press “Menu 
”again. The OSD menu will close and the projector will automatically save the new settings.
Main Menu
Sub MenuSetting
ViewSonic PJ256D | 17 |