ViewSonic NMP-550 user manual Appendix FAQ, What should I do if I forgot my password?

Page 14

6.Appendix: FAQ

What should I do if I forgot my password?

In this case, please perform a factory reset.

Use the S/W RESET button located at the back of the media player to restore factory settings. This will also clear the player’s password.

Performing a factory reset

Warning: This procedure will restore all menu settings to factory default and format the internal storage to factory conditions (all contents will be removed).

To restore factory settings and format the drive:

1.Disconnect power cable from the player unit

2.Press and hold the S/W RESET button

3.Connect the power cable while holding the S/W RESET button until status light flashes (about 15 seconds)

4.Please wait while the system drive is being formatted

Why can’t I see my video playing in the Signage Manager Express preview window when I drag my file over?

The Signage Manager Express preview window only supports WMV videos and JPEG pictures at this time. To add MPEG-2 support, you must install a separate MPEG-2 codec or DVD player application like PowerDVD. For H.264 video files, the preview window will be disabled. Support for additional codecs on the preview window will be available in a future update of Signage Manager Express.

What is the maximum file size for a single video file?

The maximum video file size for the ViewSonic NMP-550 Media Player is 2GB. We recommend reserving a safety margin to avoid exceeding the limit (i.e. limiting files to 1850MB).

How do I restore the device back to factory defaults?

The S/W RESET button located at the back of the media player can be used to restore factory settings.

To restore factory settings:

1.Disconnect power cable from the player unit

2.Press and hold the S/W RESET button

3.Connect the power cable while holding the S/W RESET button until status light flashes (approx. 15 seconds)

How do I manage the playback of contents?

Playback on a schedule is one of the main functions of the Open Standard HD Media Player. For most users, it can be managed via the easy to use Signage Manager Express software. Scala users may obtain a player license from Scala to manage the media player directly from Scala Content Manager. For advanced customization, there is SMIL compatibility. See the developer’s manual for customizing the player with open-standard W3C SMIL commands.

About Signage Manager Express: Unlike the difficulty of programming VCRs from a remote control, the Signage Manager Express software is designed to be simple by using a graphical personal computer interface. Playback contents are laid out visually in a calendar view. Anyone with basic computer skills can quickly create or modify schedules, delivering the right message to the right audience at the right times. Please refer to the Signage Manager Express User’s Manual for detailed operations and techniques.

Could the player display Flash or Microsoft PowerPoint presentations?

The player features limited PowerPoint support, but not Flash support.

While PCs can play many formats with varying degrees of success, RISC-based media players are designed to reliably play specific video formats (Please see spec for details). While Microsoft

12

Image 14
Contents NMP-550 Contents Introduction Hardware FeaturesSoftware Features Package Contents Front Panel Indicators Rear Panel I/O ConnectionsTroubleshooting Tips System Set-UpMounting provisions Connect the NMP-550 to your network Configuring the NMP-550 Media PlayerAttach a USB keyboard to the NMP-550 Video Output Settings Static Manually assign network IP addressInstalling Firmware Upgrades Clock and Calendar SettingsFactory Restore Content Management Playing a Smil demo Working with SmilIntroduction Advanced Customization via SmilTechnical Data SpecificationsMechanical Drawings Appendix FAQ What should I do if I forgot my password?Why won’t some media files play smoothly? Page Limited Warranty Limitation of Implied Warranties
Related manuals
Manual 2 pages 19.49 Kb