ViewSonic VS13172 „ Main Menu, LBA/ Large Mode Auto, Bios Main Menu, IDE Device Setting Menu

„Main Menu

The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the “<” and “>” cursor keys to navigate between menu screens.

Table 2 BIOS Main Menu

BIOS SETUP UTILITY

M a i n	A d v a n c e d	B o o t	C h i p s e t	P o w e r	S e c u r i t y	E x i t
System Date			[Wed 10/21/2009]		Use [ENTER], [TAB]
System Time			[10:18:15]		or [SHIFT-TAB] to
> SATA 1			:[WDC WD1600BEV]		select a field.
					Use [+] or [-] to
> System Information					configure system Time.

<> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Below table is described for SATA 1 setting.

Table 3 IDE Device Setting Menu

BIOS SETUP UTILITY

M a i n	A d v a n c e d		B o o t	C h i p s e t	P o w e r	S e c u r i t y	E x i t
Primary Master						Disable: Disables LBA Mode.
Device		:Hard Disk				Auto: Enables LBA Mode if the
Vendor		:WDC 1600BEVT-00ZCT0				device supports it and the
						device is not already formatted
Size:		:160.0GB				with LBA Mode disabled.
						<> Select Screen
LBA/ Large Mode			[Auto]
						↑↓ Select Item
DMA Mode			[Auto]			+- Change Field
S.M.A.R.T			[Auto]			Tab Select Field
						F1 General Help
						F10 Save and Exit
						ESC Exit
		V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

LBA/ Large Mode [Auto]

Enables or disables the LBA (Logical Block Addressing)/ Large mode. Setting to Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled.

Options: Disabled, Auto

ViewSonic VOT125 14