CAN-Bus shared features

configuration

operate

AC status

status

name

global brightness

global standby

The following CAN-Bus features are shared by all models.

Selecting configuration will present the CAN-Bus configuration screen allowing access to name, global brightness, and global standby features.

The operate settings allow you to bring the target unit in and out of standby, or mute. This key will be disabled for the unit whose touchscreen you are using to access CAN-Bus.

The AC status screen displays information from the target unit’s electrical supply sensors. Two screens are available, with the second accessed by selecting more.

The status screen is the simplest way to access essential information about the target unit. It displays the target unit’s model number, software version, operational status and serial number.

Allows you to set the name that this component will be listed under in the CAN-Bus devices screen. The name will appear next to the unit model and serial number, and facilitate the identification of units in large systems.

By setting all your components to global brightness you can adjust the touchscreen and LED brightness for your entire system by changing the brightness of a single touchscreen. All CAN-Bus software updates automatically set the updated unit to Global Brightness. If you want a particular unit to be excluded from Global Brightness, deselect Global Brightness for that unit.

By setting all your components to global standby you can bring your entire system in and out of standby by pressing the standby button of any unit or remote. All CAN-Bus software updates automatically set the updated unit to global standby. If you want a particular unit to be excluded from global standby, deselect global standby for that unit.