Eiki LC-XNB5M Basic Operation, Turning on / OFF Projector, Turning on Projector, Lamp mode

Page 19

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

 

before turning on the projector. (Refer to "CONNECTING

 

PROJECTOR" on page 11~13.)

2

Connect the projector's AC Power Cord into an AC outlet. The

 

LAMP Indicator lights red, and the READY Indicator lights green.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to the menu item "On start" on page

 

35.)

3

Press the POWER ON-OFF button on the Top Control or on the

 

Remote Control to ON. The LAMP Indicator dims, and the

Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts.

26

The Preparation Display disappears after 30 seconds.

Lamp mode

4

The input source that was selected last and the Lamp mode

*Refer to page 35 for the Lamp mode.

status icon appear on the screen after the count-down. The

 

signal from PC or Video source appears after 30 seconds.

TURNING OFF PROJECTOR

1

Press the POWER ON-OFF button on the Top Control or on the

 

Remote Control, and a message "Power off?" appears on a

 

screen.

2

Press the POWER ON-OFF button again to turn off the

 

projector. The LAMP Indicator lights bright and the READY

 

Indicator turns off. After the projector is turned off, the Cooling

 

Fans operate (for 90 seconds).

3

When the projector has cooled down, the READY Indicator lights

 

green again.

NOTE : The Projector cannot be turned on during cooling period with the READY Indicator off. You can turn it on again after the READY Indicator lights green.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

DO NOT DISCONNECT AC POWER CORD BEFORE READY INDICATOR LIGHTS GREEN.

Power off?

The message disappears after 4 seconds.

note on operation

Do not use the projector for more than 24 hours continuously. Turn off the projector at least once in 24 hours and give it a rest. Continuous use may result in shortening the lamp lifetime.

When the “Power management” function is ON, the projector detects signal interruption and turns off the Projection lamp automatically. Refer to “Power management” on page 35.

When the WARNING TEMP. indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning on the projector again. (Refer to the section "WARNING TEMP. INDICATOR" on page 39.)

19

Image 19
Contents Model LC-XNB5M To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector PreparationFor the U.S.A. and Canada SETTING-UP ProjectorConnecting AC Power Cord For Continental EuropePreparation Positioning Projector Adjustable FeetMoving Projector Preparation Installing Projector in Proper PositionTerminal Input Jack Connecting ProjectorTerminals of Projector Video Input JackTerminals Connecting to ComputerProjector Audio Connecting to Video EquipmentBefore Operation Operation of Remote ControlLaser Pointer Function Remote Control Batteries Installation Lamp Replace Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Sound Menu Before Operation Menu BARGuide Window Image Select MenuTurning on Projector Lamp modeBasic Operation Turning on / OFF ProjectorPicture Freeze Function Adjusting ScreenZoom Adjustment Keystone AdjustmentDirect Operation Sound AdjustmentTimer Function Basic Operation No Show FunctionRGB Analog Computer InputSelecting Input Source Selecting Computer SystemAuto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area H Display areaFull screen Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputInput button Video Computer AutoAV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NImage button Standard Cinema CinemaSharpness Video Input Image Level AdjustmentColor TintProvides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Projector To change the code of the Remote ControlLamp Replace Lamp ReplacementReset the Lamp Replace Counter AppendixAppendix Lamp Replace Counter Lamp Handling PrecautionsInstallation Operating Wireless MouseOperating Wireless Mouse AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Troubleshooting Function does not Remote Control doesWireless Mouse Not workAppendix Indicators and Projector Condition Indicators Projector ConditionKHz Appendix Compatible Computer SpecificationsResolution FreqTechnical Specifications Terminal HDB15-PIN Pin Configuration Appendix Configurations of TerminalsOptional Parts Page Key to better communications Canada

LC-XNB5M specifications

The Eiki LC-XNB5M is a highly versatile and advanced projector designed for a variety of applications including education, business presentations, and large venue events. This model stands out due to its impressive combination of performance, features, and technological innovations, making it an excellent choice for professionals seeking a reliable projection solution.

At the heart of the Eiki LC-XNB5M is its 3LCD technology, which ensures exceptional color accuracy and brightness. With a native resolution of 1920 x 1200, this projector delivers stunning visuals, making it ideal for detailed presentations, high-definition videos, and graphics. The remarkable brightness of 5000 lumens allows the projector to perform well even in well-lit environments, ensuring that images remain vibrant and clear regardless of ambient light conditions.

One of the standout features of the Eiki LC-XNB5M is its extensive connectivity options. It comes equipped with multiple input ports, including HDMI, VGA, and USB, facilitating easy integration with a myriad of devices such as laptops, Blu-ray players, and document cameras. This versatility makes it a perfect choice for any setting, whether it be in a classroom, conference room, or auditorium.

The projector also boasts a remarkable lens shift capability, which allows users to adjust the projection image's position without sacrificing image quality. With horizontal and vertical lens shift, it provides flexibility in installation, enabling it to be mounted in various orientations and distances from the screen.

In terms of durability, the Eiki LC-XNB5M features a long-lasting lamp life of up to 6000 hours in eco mode, reducing the frequency of lamp replacements and associated costs. Additionally, its filtration system is designed to minimize dust accumulation, contributing to extended projector life and reduced maintenance.

Furthermore, the Eiki LC-XNB5M supports several advanced features such as 3D capability, which can enhance the viewing experience for specific applications, making it suitable for entertainment as well as educational purposes. With its user-friendly interface and intuitive remote control, operating the projector is straightforward, further enhancing its appeal.

In summary, the Eiki LC-XNB5M stands out as a high-performing projector equipped with advanced technologies and features. Its impressive brightness, extensive connectivity, lens shift capabilities, and durability make it a top choice for anyone seeking a professional-grade projection solution for various environments. Its blend of versatility and performance truly sets it apart in the world of visual presentation technology.