Eiki LC-XNB5M owner manual Troubleshooting

Page 40

APPENDIX

TROUBLESHOOTING

Before calling your dealer or service center for assistance, check the items below once again.

●Make sure you have connected the projector to peripheral equipment as described properly in the section "CONNECTING PROJECTOR" on pages 11 ~ 13.

●Verify that all computer, video and power cord are properly connected and turn the equipment on.

●When you are operating the projector with a computer and it does not produce an image, restart the computer.

●Select the other input source.

Problem:

Try these Solutions

No power.

● Plug the projector into your AC outlet.

 

● Make sure the READY Indicator lights.

 

● Wait 90 seconds after the projector is turned OFF when turning the projector back on.

 

NOTE : After pressing the Power ON-OFF button to OFF, make sure the projector works as

 

follows:

 

1. The LAMP indicator lights bright, and the READY indicator is turned off.

 

2. After 90 seconds, the READY indicator lights green again and the projector can

 

be turned on by pressing the Power ON-OFF button.

 

● Check the WARNING TEMP. indicator. If the indicator flashes red, the projector cannot

 

be turned on.

 

(Refer to the section "MAINTENANCE" on page 39.)

 

● Check the Projection Lamp. (Refer to page 36.)

 

 

Image is out of

● Adjust focus of the projector.

focus.

● Make sure the projection screen is at least 5.3’ (1.6m) from the projector.

● Check the Projection Lens to see if it needs cleaning.

 

 

NOTE : Moving the projector from a cool temperature location to a warm temperature

 

location may result in moisture condensation on the Projection Lens. In such an

 

event, leave the projector OFF and wait until condensation disappears.

 

 

Picture is Left/Right

● Check Ceiling / Rear feature. (See the “SETTING” section on page 34.)

reversed.

 

 

 

Picture is

● Check Ceiling feature. (See the “SETTING” section on page 34.)

Top/Bottom

 

reversed.

 

 

 

Some displays are

● Check Display feature.(See the “SETTING” section on page 34.)

not seen during the

 

Operation.

 

 

 

No image.

● Check the connection between your computer or video equipment and the projector.

 

● When turning the projector on, it takes about 30 seconds to display an image.

 

● Check the system that you select is corresponding with your computer or video

 

equipment.

 

● Make sure the temperature is not out of Operating Temperature (5°C ~ 35°C).

No sound.

● Check audio cable connection from audio input source.

 

● Adjust the audio source.

 

● Press the VOLUME (+) button.

 

● Press the MUTE button.

 

 

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model LC-XNB5M To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design ComputersColor Systems Component VideoPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor Continental Europe For the U.S.A. and CanadaAdjustable Feet Preparation Positioning ProjectorPreparation Installing Projector in Proper Position Moving ProjectorConnecting Projector Terminals of ProjectorVideo Input Jack Terminal Input JackTerminals Connecting to ComputerProjector Connecting to Video Equipment AudioBefore Operation Operation of Remote ControlLaser Pointer Function Remote Control Batteries Installation TOP Controls and Indicators Lamp Replace IndicatorOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowImage Select Menu Sound MenuLamp mode Basic OperationTurning on / OFF Projector Turning on ProjectorAdjusting Screen Zoom AdjustmentKeystone Adjustment Picture Freeze FunctionSound Adjustment Timer FunctionBasic Operation No Show Function Direct OperationComputer Input Selecting Input SourceSelecting Computer System RGB AnalogPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input Input button Video ComputerAuto VideoComponent Video Signal Format Selecting Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Image button Standard CinemaVideo Input Image Level Adjustment ColorTint SharpnessProvides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Remote Control To change the code of the ProjectorLamp Replacement Reset the Lamp Replace CounterAppendix Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterInstallation Operating Wireless MouseOperating Wireless Mouse AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Troubleshooting Remote Control does Wireless MouseNot work Function does notIndicators Projector Condition Appendix Indicators and Projector ConditionAppendix Compatible Computer Specifications ResolutionFreq KHzTechnical Specifications Appendix Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationOptional Parts Page Key to better communications Canada

LC-XNB5M specifications

The Eiki LC-XNB5M is a highly versatile and advanced projector designed for a variety of applications including education, business presentations, and large venue events. This model stands out due to its impressive combination of performance, features, and technological innovations, making it an excellent choice for professionals seeking a reliable projection solution.

At the heart of the Eiki LC-XNB5M is its 3LCD technology, which ensures exceptional color accuracy and brightness. With a native resolution of 1920 x 1200, this projector delivers stunning visuals, making it ideal for detailed presentations, high-definition videos, and graphics. The remarkable brightness of 5000 lumens allows the projector to perform well even in well-lit environments, ensuring that images remain vibrant and clear regardless of ambient light conditions.

One of the standout features of the Eiki LC-XNB5M is its extensive connectivity options. It comes equipped with multiple input ports, including HDMI, VGA, and USB, facilitating easy integration with a myriad of devices such as laptops, Blu-ray players, and document cameras. This versatility makes it a perfect choice for any setting, whether it be in a classroom, conference room, or auditorium.

The projector also boasts a remarkable lens shift capability, which allows users to adjust the projection image's position without sacrificing image quality. With horizontal and vertical lens shift, it provides flexibility in installation, enabling it to be mounted in various orientations and distances from the screen.

In terms of durability, the Eiki LC-XNB5M features a long-lasting lamp life of up to 6000 hours in eco mode, reducing the frequency of lamp replacements and associated costs. Additionally, its filtration system is designed to minimize dust accumulation, contributing to extended projector life and reduced maintenance.

Furthermore, the Eiki LC-XNB5M supports several advanced features such as 3D capability, which can enhance the viewing experience for specific applications, making it suitable for entertainment as well as educational purposes. With its user-friendly interface and intuitive remote control, operating the projector is straightforward, further enhancing its appeal.

In summary, the Eiki LC-XNB5M stands out as a high-performing projector equipped with advanced technologies and features. Its impressive brightness, extensive connectivity, lens shift capabilities, and durability make it a top choice for anyone seeking a professional-grade projection solution for various environments. Its blend of versatility and performance truly sets it apart in the world of visual presentation technology.
Top Page Image Contents