Eiki LC-XNB4MS, LC-XNB4S Maintenance, AIR Filter Care and Cleaning, Cleaning Projection Lens

Page 40

APPENDIX

MAINTENANCE

WARNING TEMP. INDICATOR

WARNING TEMP. Indicator flashes red when an internal temperature of a projector exceeds the normal temperature. This Indicator stops flashing when the temperature of a projector returns to normal.

When WARNING TEMP. Indicator continues to flash, check the items listed below.

1

Ventilation Slots of the projector may be blocked. In such an event, reposition the projector so that Ventilation Slots

are not obstructed.

2

Air Filter may be clogged with dust particles. Clean Air Filter by following the section AIR FILTER CARE AND

CLEANING below.

3

If WARNING TEMP. Indicator remains on after performing the above checks, Cooling Fans or the Internal Circuits may

be malfunctioning. Contact service personnel from an authorized dealer or a service station.

AIR FILTER CARE AND CLEANING

Removable Air Filter prevents dust from accumulating on the surface of Projection Lens and Projection Mirror. Should Air Filter become clogged with dust particles, it will reduce Cooling Fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean Air Filter following the steps below:

1

Turn off the projector, and disconnect AC power cord from the

 

AC outlet.

2

Turn the projector upside down and remove Air Filter by pulling

 

the latches upward.

3

Clean Air Filter with a brush or wash out dust and particles.

4

Replace Air Filter properly. Make sure that Air Filter is fully

 

inserted.

CAUTION

Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of the projector.

AIR FILTER

Pull up and remove.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. This condition may degrade the quality of a projected image.

When the above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

CLEANING PROJECTION LENS

Follow these steps to clean Projection Lens:

1

Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.

 

Abrasive cleaners, solvents or other harsh chemicals might scratch a surface.

2

3

Lightly wipe a cleaning cloth over Projection Lens.

When the projector is not in use, replace Lens Cover.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model LC-XNB4S LC-XNB4MS To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Compact Design Digital Zoom for ComputerPreparation Name of Each Part of ProjectorConnecting AC Power Cord SETTING-UP ProjectorFor Continental Europe Adjustable Feet Preparation Positioning ProjectorPreparation Moving Projector Connecting Projector Terminals of ProjectorVideo Input Jack Terminal Input JackConnecting Projector Connecting to ComputerTerminals Projector Connecting to Video Equipment TerminalsOperation of Remote Control Unit Before OperationRemote Control Batteries Installation TOP Controls and Indicators Lamp Replace IndicatorOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Basic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorAdjusting Screen Zoom AdjustmentKeystone Adjustment Picture Freeze FunctionSound Adjustment Timer FunctionBasic Operation No Show Function Direct OperationComputer Input Selecting Input SourceSelecting Computer System RGB AnalogComputer Input Compatible Computer Specifications ResolutionFreq KHzPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Video InputVideo Component Video Signal Format Selecting Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Video Input Image Level Adjustment ColorTint SharpnessProvides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Remote Control Unit To change the code of ProjectorAppendix Lamp ReplacementLamp Replace Lamp Handling Precautions Appendix Lamp Replace CounterInstallation Operating Wireless MouseOperating Wireless Mouse AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Appendix Configurations of Terminals Monitor OUT Terminal AnalogOptional Parts Page Page Key to better communications Canada

LC-XNB4S, LC-XNB4MS specifications

The Eiki LC-XNB4MS and LC-XNB4S are advanced projectors designed to deliver exceptional image quality and flexible performance for a variety of applications, including education, business, and home theater settings. These models stand out due to their robust specifications and innovative features, ensuring that users can enjoy stunning visuals and reliable operation.

One of the key highlights of both the LC-XNB4MS and LC-XNB4S projectors is their high brightness capability. With a brightness rating of up to 5,000 ANSI lumens, these projectors can produce clear and vibrant images even in well-lit environments. This makes them ideal for classrooms, conference rooms, and other spaces where ambient light can affect visibility. The powerful brightness is complemented by a contrast ratio of 2000:1, which enhances the depth and richness of colors, ensuring that detailed images are presented without losing clarity.

Both models utilize 3LCD technology, renowned for its ability to create bright and vivid colors while maintaining sharpness and detail. This technology reduces the risk of color decay over time and provides a more consistent color reproduction compared to DLP projectors. The Eiki LC-XNB4MS and LC-XNB4S are equipped with advanced image processing features, including edge blending and geometric correction, allowing users to create immersive multi-projection setups seamlessly.

In terms of connectivity, the projectors offer a wide range of options, including HDMI, VGA, and USB ports, ensuring compatibility with various devices such as laptops, tablets, and streaming devices. The LC-XNB4MS and LC-XNB4S also support wireless connectivity, enabling users to share content from their devices without the hassle of tangled cables. Moreover, the presenters can use the integrated network capabilities for remote monitoring and management, enhancing the ease of operation for IT administrators.

The design of the Eiki LC-XNB4MS and LC-XNB4S models prioritizes user convenience and accessibility. They feature a lightweight and compact form factor, making them easy to transport and install. The models come with a long-lasting lamp life, reducing the need for frequent replacements and ensuring lower total cost of ownership.

In summary, the Eiki LC-XNB4MS and LC-XNB4S projectors represent an excellent choice for those seeking high-performance projection solutions. With their high brightness, advanced 3LCD technology, comprehensive connectivity options, and user-friendly design, these models are set to meet the diverse needs of users across various settings.
Top Page Image Contents