Eiki PJNET-300 owner manual Dns

Page 79

Q&A

Q&A

Installation/Access

QWhy doesn’t the setting page appear in my web browser?

AFollowing causes are possible. Please check them.

1.The projector does not connect to the network. Check LED indicators status (☞ p.15).

-Check the connection of LAN cable if the LINK indicator does not light orange.

-Check the network configuration of the projector if ACT indicator does not light green.

2.Function "Network" in the projector is not set to "ON".

Set up by using the projector’s on-screen menu (☞ p.18). 3. Wrong network configuration of the projector

Check the network configuration of the projector by using the projector’s on-screen menu (☞ p.18).

4. Wrong network configuration of the computer.

Check the network configuration of the computer.

5.The Network Unit is used with the default setting (☞ p.18).

6.The proxy setting of the web browser is not set correctly (☞ p.72).

7.The computer does not provide TCP/IP protocol.

QNo setting page in my web browser? Is the problem in the network or in the projector? I would like to find out the problem whether it is in the network or in the projector

ACheck it by the following steps

1.Disconnect the projector from the network and connect the projector and computer with the UTP cross cable directly.

2.Change network configuration of the computer and projector as shown in the example below.

(Projector setting)

 

(Computer setting)

 

IP Address

: 192.168.0.2

IP Address

: 192.168.0.5

Subnet Mask

: 255.255.255.0

Subnet Mask

: 255.255.255.0

Default gateway

: 0.0.0.0

Default gateway

: (blank)

DNS

: 0.0.0.0

DNS

: (blank)

ENGLISH

OWNER'S MANUAL

79

Page 78 Page 80
Image 79
Page 78 Page 80
Contents PjNET-300 Federal Communication Commission Notice ComplianceEnglish Contents Contents Page Chapter Preparation Snmp Agent function p.36 FeaturesWeb Management function p.39 Mail Alert function p.32Multi-control function p.56 Automatic On/Off using Clock function p.51Control port ready for external equipment p.61 Operating environment Package contains Before useUse of this manual Expression/AbbreviationTrademarks Chapter Installation Installation and network configuration p.16-22 Flow of installationFunction of the Network Unit p.15 Name and function of each part Mounting Installation and network configurationConnection of LAN cable Selection of network menu Network configurationConfigure the network Confirmation of the network menuCompleting of installation Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Fixing the network configurationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Select a display mode and login Login the setting page of the projectorEnter the IP address Main setting page in the Standard Mode display Display of main settingMain setting page in the Light Mode display How to use the settingText box setting Type of the setting palletWith the Network Unit Initial settingWhats PJLink? PJLink and password settingAuto setting Date and time settingNetwork configuration Setting Smtp server and administrator address Mail settingOption selection for sending alert mail Registering and deleting E-mail addressesExamples Type and contents of alert mail When the life span of lamp is reached PJ information Snmp settingSnmp setting Basic Setting and Operation Chapter Controlling the Projector Popup confirmation window Power control and status checkStatus Description About projector conditionInput ControlsSystem Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input Available selection when the Y, Pb/Cb, Pr/Cr inputSelect an image mode Image adjustmentMenu SoundAdjusts the vertical position of the screen PC adjustmentNatural wide, True There may not be available Setting up the projectorLamp Corres. Value Reset Save/delete the settings Save the controls and settingsLoad a control set Check the saved itemsHow to set the timer Timer settingSet a day or date Select an event action Check the timer eventsChange the event mode Set an execute timeProjector Power Event Items Description Projector informationTime, replace lamp immediately Indication of the lamp statusMulti-control Controlling and setting the multi-projectorsStart/stop the multi control Confirmation of registered projector Register the projectorStatus Change the mode of the registered projectorSetting all together Conf. & Change page in the light modeControlling all together Chapter Use of Serial Port Use of Serial Port Serial port settingSetting examples for the serial control Example Control examplesPJ3 PJ2 PJ1 Preparation Use of telnetUse of telnet Control the projector with telnet Command list tableChapter Appendix Peer-To-Peer connection Examples of connectionEntrance hall Gateway Router installed in the networkActive Script/JavaScript enable Web browser settingProxy setting Examples OS/Browsers ActiveScript settingWindows XP Professional Internet Explorer Proxy setting Netscape Navigator JavaScript SettingProxy setting TCP/IP Product specificationLAN port specification Port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Unit? What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?Key to better communications Canada

PJNET-300 specifications

The Eiki PJNET-300 is an advanced projector designed for both professional and educational environments, offering a blend of high performance, versatility, and ease of use. Known for its impressive image quality and reliability, this model has gained recognition for its innovative technologies tailored to meet diverse presentation needs.

One of the standout features of the Eiki PJNET-300 is its high-resolution display capability. With a native resolution of 1920x1080 pixels, it delivers crystal-clear images that capture every detail, making it ideal for showcasing high-definition content. The projector is equipped with a brightness level of up to 3,000 ANSI lumens, ensuring vibrant images even in well-lit rooms. This capability allows users to conduct presentations in various environments without the need for dimming lights.

In terms of connectivity, the Eiki PJNET-300 excels with a wide range of input options. It supports HDMI, VGA, and USB connections, accommodating various devices such as laptops, tablets, and video players. The inclusion of an integrated wireless module enables easy screen sharing from mobile devices, further enhancing collaborative efforts during presentations.

The projector's built-in digital keystone correction feature ensures that images remain perfectly aligned, regardless of the angle from which they are projected. This technological advancement allows users to set up the unit in less-than-ideal locations while still delivering a professional-quality display.

The Eiki PJNET-300 also boasts a robust lamp life, with the ability to last up to 10,000 hours in eco-mode. This significantly reduces maintenance costs and downtime, making it a cost-effective choice for institutions and businesses alike. Additionally, the projector operates quietly, ensuring that it does not become a distraction during critical presentations.

Another noteworthy characteristic is its user-friendly interface. The simplified control panel and intuitive menu system allow users to navigate settings effortlessly, even for those who may not be tech-savvy. The favorable weight and compact design make the PJNET-300 highly portable, making it easy to transport between different locations.

In conclusion, the Eiki PJNET-300 stands out in the competitive projector market due to its combination of high-resolution output, versatile connectivity options, advanced correction technology, and user-friendly design. Whether for a business presentation, classroom teaching, or home theater use, the Eiki PJNET-300 is poised to provide exceptional performance and reliability.
Top Page Image Contents