Eiki PJNET-300 owner manual Installation

Page 22

Chapter 2 Installation

Notice about system construction

For installation of multiple projectors into the same network with Network Unit.

Do not install multiple projectors with Network Units that have their default network settings to the same network. The use of the Network Units which have the default IP address set to the same network settings will cause IP addresses to collide and create a malfunction. When you install multiple projectors into the same network, configure the network with the following steps.

1.Change the IP address from the default IP address. To change the IP address, use the network setting menu on the projector. Please see item "Network configura- tion" for further information (☞ p.18).

2.Make sure that there is no network equipment set with the same IP address in the network before connecting to the network.

3.When installing other projectors, follow the above steps to change the IP address and connect to the network.

In case of installing the projector with Network Unit into the network constructed with the DHCP/BOOTP server.

This Network Unit does not support the DHCP/BOOTP server. The static IP address must be manually configured. To use this product in this network environment, set it up so that the DHCP/BOOTP server does not assign the IP address configured to this product for another device on the network. Please consult your network administrator for further information.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents PjNET-300 Compliance Federal Communication Commission NoticeEnglish Contents Contents Page Chapter Preparation Mail Alert function p.32 FeaturesWeb Management function p.39 Snmp Agent function p.36Multi-control function p.56 Automatic On/Off using Clock function p.51Control port ready for external equipment p.61 Operating environment Before use Package containsUse of this manual Expression/AbbreviationTrademarks Chapter Installation Installation and network configuration p.16-22 Flow of installationFunction of the Network Unit p.15 Name and function of each part Installation and network configuration MountingConnection of LAN cable Confirmation of the network menu Network configurationConfigure the network Selection of network menuFixing the network configuration Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Select a display mode and login Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayType of the setting pallet Text box settingInitial setting With the Network UnitPJLink and password setting Whats PJLink?Date and time setting Auto settingNetwork configuration Mail setting Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ informationSnmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation windowAbout projector condition Status DescriptionControls InputAvailable selection when the Y, Pb/Cb, Pr/Cr input Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input SystemImage adjustment Select an image modeSound MenuPC adjustment Adjusts the vertical position of the screenSetting up the projector Natural wide, True There may not be availableLamp Corres. Value Reset Save the controls and settings Save/delete the settingsCheck the saved items Load a control setHow to set the timer Timer settingSet a day or date Set an execute time Check the timer eventsChange the event mode Select an event actionProjector Power Event Projector information Items DescriptionIndication of the lamp status Time, replace lamp immediatelyControlling and setting the multi-projectors Multi-controlStart/stop the multi control Register the projector Confirmation of registered projectorChange the mode of the registered projector StatusSetting all together Conf. & Change page in the light modeControlling all together Chapter Use of Serial Port Serial port setting Use of Serial PortSetting examples for the serial control Control examples ExamplePJ3 PJ2 PJ1 Use of telnet PreparationUse of telnet Command list table Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network Entrance hallActive Script/JavaScript enable Web browser settingProxy setting Examples OS/Browsers ActiveScript settingWindows XP Professional Internet Explorer Proxy setting JavaScript Setting Netscape NavigatorProxy setting Product specification TCP/IPLAN port specification Port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?Key to better communications Canada

PJNET-300 specifications

The Eiki PJNET-300 is an advanced projector designed for both professional and educational environments, offering a blend of high performance, versatility, and ease of use. Known for its impressive image quality and reliability, this model has gained recognition for its innovative technologies tailored to meet diverse presentation needs.

One of the standout features of the Eiki PJNET-300 is its high-resolution display capability. With a native resolution of 1920x1080 pixels, it delivers crystal-clear images that capture every detail, making it ideal for showcasing high-definition content. The projector is equipped with a brightness level of up to 3,000 ANSI lumens, ensuring vibrant images even in well-lit rooms. This capability allows users to conduct presentations in various environments without the need for dimming lights.

In terms of connectivity, the Eiki PJNET-300 excels with a wide range of input options. It supports HDMI, VGA, and USB connections, accommodating various devices such as laptops, tablets, and video players. The inclusion of an integrated wireless module enables easy screen sharing from mobile devices, further enhancing collaborative efforts during presentations.

The projector's built-in digital keystone correction feature ensures that images remain perfectly aligned, regardless of the angle from which they are projected. This technological advancement allows users to set up the unit in less-than-ideal locations while still delivering a professional-quality display.

The Eiki PJNET-300 also boasts a robust lamp life, with the ability to last up to 10,000 hours in eco-mode. This significantly reduces maintenance costs and downtime, making it a cost-effective choice for institutions and businesses alike. Additionally, the projector operates quietly, ensuring that it does not become a distraction during critical presentations.

Another noteworthy characteristic is its user-friendly interface. The simplified control panel and intuitive menu system allow users to navigate settings effortlessly, even for those who may not be tech-savvy. The favorable weight and compact design make the PJNET-300 highly portable, making it easy to transport between different locations.

In conclusion, the Eiki PJNET-300 stands out in the competitive projector market due to its combination of high-resolution output, versatile connectivity options, advanced correction technology, and user-friendly design. Whether for a business presentation, classroom teaching, or home theater use, the Eiki PJNET-300 is poised to provide exceptional performance and reliability.
Top Page Image Contents